Shopping Cart

1 Mountain Walking Pole A200

Soft foam handle, 2D design. Pommel on the top. Adjustable wrist strap

4.3 / 5

Regular price



1 Mountain Walking Pole A200 designed for occasional hikers, on level and hilly terrain: hiking routes, pathways, woodland.

Already equipped for the mountains: longer handle for banking terrain, adjustable wrist strap. And the same simple Push-pin adjustment system.
Ergonomic grip

Soft foam handle, 2D design. Pommel on the top. Adjustable wrist strap


Very simple push-pin system (push button). 43.3"/15.3"/47.2"/49.2"/51.2"


8.1 oz / pole

Compact design

3 telescopic parts. Collapsed length: 22.4"


Aluminum 7075-T6 / 6061-T6. Large tube diameter 20/18/16 mm. Tungsten tip


Supplied with removable replaceable summer basket.Tip can be replaced via theASS

How it was designed...

This model is designed and validated by our team, at the foot of the Mont Blanc. This model uses the chassis of the A100, which we have "boosted" to get it ready to take on the mountains! It retains the push-pin adjustment system and over-sized tubes. However, it can be set higher (51.2"), has an adjustable wrist strap, essential to lean on it, a long foam handle for multi-position grip and a tungsten carbide tip to withstand rock.

How to adjust your poles to the correct length?

Hold the poles with your arms bent at a right angle. To adjust the length: press the button to release it from the hole, slide the tube until the button reaches the hole at the desired length. Use the line printed on the lower tube to align the button with the holes. Never go over the STOP line to avoid breaking the pole.

Directions for use

These hiking poles are designed to help you balance, propel yourself and spread the effort between the arms and legs. To increase safety, before you start and at regular intervals, check your pole's locking mechanism by pressing down hard on it. Do not attach to your rucksack in stormy weather.

Care instructions

Maintaining your poles properly enable you to maintain optimal function and increases their lifespan. After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with water or without, with a soft brush or paintbrush. Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.

Product Testing

To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During the design stage, each model passes laboratory tests that reproduce these stresses; etc.) until rupture. We also tests parts separately (tightening power, tearing, etc). Finally, these tests are regularly repeated during production to guarantee constant quality.


Shaft : 100.0% Aluminum Handle : 100.0% Polypropylene

Storage Instructions

Store the poles without tightening the adjustment system, to avoid stress and retain their hold power. Store poles in a dry place.



Model Code


1 Mountain Walking Pole A200 reviews

Sort By Write Review

Recently Viewed Products


Size Guide Visual