Foam: 100.0% Rubber ; Main fabric: 100.0% Polyamide ; Yoke: 86.0% Polyamide, 14.0% Elastane

The first selection criterion when choosing a surfing wetsuit is the water temperature.Water temperature varies according to the location and the time of the year.Systematically make sure that the water temperature at your spot corresponds to the recommended temperature range:Warm water above 70°F.Temperate water between 62 and 72°F.Cold water between 53 and 62°F.Very cold water between 45 and 54°F.Visit the site seatemperature.org to find out the temperature of your spot.

The 2nd criterion to take into account is the length of your sessions. If your sessions last less than an hour, the 100 models will be suitable. For up to 2 hours, opt for the 500 models, and for up to 3 hours, the 900 models.Compared to the 100 models, the 500 models will be warmer (and more watertight) and more efficient at reducing fatigue (more freedom of movement) and irritation. The same is true for the 900 models compared with the 500 models.NB: the 900 models are easier to put on.

To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a wetsuit that is too big, folds will appear, you will experience irritation and thermal insulation will be reduced (letting in water).Try it on before you buy it!

This 500 4/3 OLAIAN wetsuit is made of genuine neoprene to guarantee greater thermal insulation.The neoprene is lined with synthetic fabric for added resistance to wear. Neoprene thickness: 4 and 3 mm. Neoprene is a closed-cell polychloroprene elastomeric foam with trapped nitrogen bubbles that have insulating properties. We test and guarantee the thermal quality of our neoprene materials.

The neck finish has been developed to limit irritation. According to the sensitivity of the wearer, a UV top can be worn under the wetsuit to reduce the risk of irritation. The application of grease (e.g. Vaseline) in friction areas (neck, underarms) is also recommended if wearing the wetsuit for long periods. Make sure the flap is always inside the wetsuit to limit the risk of irritation with the zipper and the neck.

Our zippers and fastenings are laboratory-tested in order to ensure an optimal lifespan and good resistance to salt water. We have put the zipper at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).

We are required by law to put a short cord on the zippers of junior products to prevent the risk of strangulation for the youngest users. From size 10 years, the cords are longer and allow handling independently. A small rip-tab prevents accidental opening of the zipper during use.

The seams are stitched and glued to ensure a watertight seal and durability. The seams are blind-stitched, which means the thread does not pass through the entire thickness of the neoprene and so prevents water from getting through. The absence of threads on the inside avoids irritation and chafing. Patches for comfort and reinforcement are strategically placed on the inside in sensitive areas.

There is a key pocket under the zipper flap. From size 10 years.

Developed and tested by our design teams in Hendaye, France. The fabrics used for this product are laboratory tested to ensure the best possible quality and durability.

In a dry, ventilated place. Avoid heat sources. To extend the life of your wetsuit, do not leave it out to dry in direct sunlight. Machine washing is not recommended.

Imported