Men's 5.5 mm Scuba Diving Full Wetsuit Subea+ SCD 500

Foam: 100.0% Rubber - Chloroprene - Neoprene ; Lining: 100.0% Polyamide

5.5 mm full one-piece wet type with back zip. Seams taped using a GBS (glued and blind stitched) assembly.Once a thin layer of water (that enters through the zip) gets trapped between you body and the wetsuit, the water stays warm as it is not replaced. This thin layer of water keeps you warm.smooth double cuff with zips on the wrists for easier dressing and improved watertightness, when the cuffs are turned up

100% stretch neoprene (FFA) for added freedom of movement during your dive and to make it easier to get into your wetsuit.Thermospan neoprene panels on the chest: even softer for increased comfort and warmth!Weight of the wetsuit (size L): 3.9 lbs.

First, the neoprene is bonded, and then stitched for maximum resistance to abrasion. A specific stitch is used: the needle does not pass completely through the neoprene to prevent water from entering the jacket when diving.

Wrist protection to prevent the dive computer from turning.

This scuba diving suit provides thermal protection that has been tested by the independent INPP institute in order to validate its compliance with the current standard (EN 14225-1: 2005).This suit is certified CLASS CA (+7°C/+12°C / +45°F/+54°F)B (+10°C/+18°C / +50°F/+64°F)C (+16°C/+24°C / +61°F/+75°F)D (+22°C/+30°C / +72°F/+86°F)

When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1mm under-shorty or a 5.5 mm over-shorty.

This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7 mm. Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.

Put your foot in a plastic bag. Then put your leg into your wetsuit. Your foot comes out completely and smoothly!To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

1) After each session, soak the wetsuit in clean water, on the outside and the inside2) Use a bactericide solution to clean3) Rinse thoroughly in clean water4) Dry on a large hangar in a well ventilated place in the shade.Caution: the sun will cause the colors of the textile parts of the wetsuit to fade and speeds up the aging process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.

Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.

Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.

Imported