8.9 mm x 164' Standard Triple Dry Climbing and Mountaineering Rope

Main fabric: 100.0% Polyamide

This rope has UIAA Water-Repellent label. A brief summary of test:- A rope sample is subjected to light abrasion over its entire surface, the equivalent to a few days’ use.- It is soaked for 15 minutes.- the amount of absorbed water must not be greater than 5% of the sample’s weight.The SIMOND DRY ropes more than meet UIAA requirementsThe rope's mechanical features last longer in cold and wet conditions.

Deterioration of rope ends is no longer an issue thanks to this new ultrasound fusion process.

To improve your safety, this rope features a black mark which indicates the middle of the rope.

1.9 oz/mPLEASE NOTE: Weight measurements made according to the EN 892 standard.For example, for a single rope, the rope must be exposed to 10 kg (22 lbs) of tension for 1 minute in very precise temperature and moisture conditions.This gives you the real weight of the rope, which is often superior to the weight given by the standard. The weight measurement according to the standard is used to compare 2 ropes to each other.

NUMBER OF FALLS: 5/15/35IMPACT FORCE: 7.9/6/9.5 KNDYNAMIC ELONGATION: 32.3%/29.7%/26.8%STATIC ELONGATION: 8.2%/8.2%/4.9%SHEATH SLIPPAGE: 0NUMBER OF SPINDLES: 40

It's important to properly care for your rope to reduce wear.As dirt wears ropes down, we recommend:1- using a rope cover;2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water.3- Air-dry the rope out of the sun and away from all sources of heat.

Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.

It is important to check your rope regularly. To do so, run the rope through your hands and inspect it meter by meter along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!

Designed by our teams in the Chamonix Valley, at the foot of the Mont Blanc, all our ropes are lab-tested, certified to guarantee their mechanical features.Our technical partners test them in the field to validate product claims.

Use a rope bag, to reduce rope wear and coilingDo not store in the trunk of a car in high temperaturesAvoid all contact with chemical productsDry before storing (away from UV rays)

Imported