Baby Ski Suit - WARM LUGIKLIP Blue

Padding: 100.0% Polyethylene Terephtalate ; Main fabric: 100.0% Polyethylene Terephtalate ; Main lining: 100.0% Polyethylene Terephtalate ; Secondary lining: 100.0% Polyethylene Terephtalate ; Coating: 100.0% Polyurethane

Our designers use wadding to keep the body warm. This polyester-based synthetic component traps more or less air depending on its thickness. The thicker the wadding, the more air it contains and the warmer it is. The baby snowsuit has 150 g/sqm wadding.

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 2,000 mm can therefore withstand the pressure exerted by a 2,000 mm water column. A quality guarantee for this baby ski suit.

Use the Lugiklip system to attach Wedze baby mittens onto the sleeves of their Wedze baby ski suit and jacket.In their quest for independence, your kid can attach the mittens on the sleeves on their own without going wrong thanks to the fun design of the Lugiklip accessories! Just combine the colours and animal heads will take shape.The mittens will always be to hand, and the right hand!The mittens are not included when buying the baby ski suit

Put the elastic at the bottom of the baby ski suit over the boot to prevent snow and draughts from getting inside the snow boot.

To make sure you stay warm and dry, we recommend using the 3-technical-layer rule: - Layer 1 or thermal base layer to stay dry. - Layer 2 or an insulating layer, to keep the heat in. - Layer 3 against bad weather.

A water-repellent fabric lets water run off its surface, without absorbing it: the fabric does not soak up water and therefore remains lightweight and warm. You can see drops of water beading and running off the surface of the fabric. The water repellent property is obtained by applying a treatment to the outer surface of the fabric. This treatment needs to be renewed during the lifetime of the garment (every 3 washes).

To reactivate the water-repellent property, wash the garment inside out on a synthetic cycle at 30°C and rinse thoroughly. You can use your usual washing powder but no fabric softener. Then leave your baby ski suit to air-dry completely on a drying rack. Finally, turn your garment the right way round and put it in the tumble dryer on low heat for 10 minutes. The heat will reactivate the water-repellent property of the fabric.

By recycling plastic bottles or recycled fabrics to produce our polyester, we reduce the use of petrol-based resources while maintaining the material's quality and performance in practice.

Space to write your kid’s name in order to personalise the product. Handy for finding their baby ski suit at the nursery.

All the sledging products are tested under the real-life conditions for which they are designed: snow, cold and all the conditions you're likely to encounter when sledging. The design teams, product leaders, engineers and pattern makers ensure that the programme for which the product has been designed and developed corresponds perfectly to its use in the field.

Preferably store on a hanger, without folding, to avoid damaging the fabric's membrane. Dry thoroughly before storing in a dry, well-ventilated place.

Imported