Lugik, Reversible Warm Skiing/Sledding Jacket, Babies'

Our designers use padding to keep the body warm. This synthetic padding containing polyester stores more or less air, depending on its thickness. So the thicker the padding, the more air it contains and the more insulating it is.

The resistance of a fabric is measured using water pressure expressed in water column mm (test based on ISO 811). The higher the pressure, the more waterproof the fabric. A component with a waterproofing resistance of 2,000 mm resists the pressure of 2,000 mm of water. High jacket quality is guaranteed.

A water-repellent fabric allows water to glide over its surface without absorbing it: So the textile does not absorb the water and remains light and breathable. You will observe water droplets form and stream off the fabric’s surface. A fabric becomes water-repellent by applying a treatment to its outer surface. This treatment must be renewed in the course of the garment's lifetime (every 3 washes).

To reactivate water-repellent properties, we recommend washing your garment inside out using an 86°F synthetic cycle and rinsing thoroughly. You can use your usual detergent but no fabric softener. Then let your jacket dry in the open air, flat on a drying rack. Finally turn your garment the right way around, and put it in the tumble dryer, at a low temperature for 10 minutes. The heat will allow the fabric’s water-repellent nature to be reactivated.

There's a place where you can write your child's name to personalize the product. Handy when you want to find your ski suit at the nursery.

Imported

All Luge products are tested in the same real conditions they're used in and for which they were designed: in the snow, in the cold and in any of the conditions you're likely to encounter when sledging. The design teams, the product leaders, the engineers and the pattern makers ensure that the program for which the product has been conceived and developed corresponds perfectly to its usage on the slopes.

Store preferably on a hanger and avoid folding, as this can damage the tissue coating. Make sure that the garment is completely dry before storing in a dry and well-ventilated place.