Bike Tire Self-Healing Inner Tube designed for preventing punctures. allows you to continue cycling when a conventional inner tube would have gone flat.
26x1.7 to 26x2.2 self-healing inner tube with Schrader valve. The preventive sealant inside the inner tube automatically repairs punctures.
26" Schrader valve (large valve) tires and wheels.
The liquid in the inner tube seals small punctures (< 3 mm).
The hole is sealed while you ride.
How to choose your inner tube
Check all the information indicated on the sidewall of the tire (diameter and width).
For example, 26 x 2.20 means a tire with a 26 inch diameter and a cross-section width of 2.2 inches.
On the sidewall of the tire you will also find the dimensions in mm expressed in ETRTO international units. For example, 50-559 means the tire is 50 mm wide with an inner diameter of 559 mm (approx. 26" x 2").
Removing an inner tube
Remove the used inner tube using B'Twin tire levers (item code 8047839).
What to check before installing your new inner tube
Check the condition of your tire and replace it if necessary.
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip. Even slightly bent rim strips can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.
Fitting your inner tube
Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rims.
Put the inner tube entirely inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Mounting the tire
Start by mounting the tire onto the wheel on the opposite side to the valve.
Finish mounting the tire at the valve to avoid pinching the inner tube.
Never mount your tire using a screwdriver or a tire lever as you risk pinching and puncturing the inner tube.
Inflating the tire
Inflate your tire carefully to the pressure recommended by the manufacturer (visible on the sidewall of the tire in PSI or bars; 1 bars = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.
Tip from the pros
To avoid punctures due to the inner tube being pinched, and to get the best performance out of your tire, we recommend checking your tire pressure and inflating it if necessary before each ride.
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Membrane/coating : 100.0% Rubber - Isobutylene Isoprene Rubber - Butyl
Not suitable for use on the sides of your tires
Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging, etc.).
Wheel size is printed on the sidewall of your tire. Always carry a spare inner tube and a pump.
Warning for California customers
Bike Tire Self-Healing Inner Tube reviews