Bullwhip 300 Evo On-Piste and All-Mountain Snowboard

Deck: 70.0% Wood, 20.0% Fiberglass, 10.0% Epoxy

Sintered base 20 mm Poplar wooden core Number of inserts: 8 + 8 (3 possible positions per binding, 40 mm between each insert)Setback: 10 mmSize 155: Front width 285 mm, center 246 mm, rear 285 mm Radius 8.5 m Effective edge 1140 mm. Recommended stance: 500 mm.Size 151:Front width 285 mm, center 246 mm, rear 289 mmRadius 8.3 m Effective edge 1104 mmRecommended stance: 475 mmOur boards are supplied already waxed. They are ready to ride

In general, for all-terrain use, choose a 6” or 8” (15 to 20 cm) drop (e.g., a person who is 5'9” tall should choose a board between 159 and 154 cm in length). If you choose a shorter board, it will be easier to control. This is also advised for people who are light for their height. A bigger board will be more stable at high speed.151 cm (50-85 kg) => from 5'5” to 5'8”155 cm (60-90 kg) => from 5'7” to 5'10”

An easy and accessible snowboard that really helps you progress. To offer you a snowboard that provides the best value for money, we have reviewed how our snowboards are shipped. That's why this snowboard comes without bindings. And to avoid compromising on either riding pleasure or board longevity, we've kept its wooden core.

The Bullwhip 300 evo board is perfect on the slopes, in all types of snow. Flex 6/10 and soft torsion, standard but slight camber, directional shape: it's designed to make learning to snowboard easier. Offers float performance on powdery snow; playful for beginner freestylers. Its wooden core lets you push it on hard snow, within reason.

The shape of the board is directional--that is to say that the board has a front and a rear. It is not symmetrical. The tail of the board is slightly narrower than the front and the bindings, as well as the contact points of the snowboard, are set back slightly. A directional shape gives better edge grip when turning, better control of the trajectory, and more acceleration on exiting turns.

A standard camber is curved upward between the 2 points of contact between board and snow. Thanks to the elasticity of the board, a standard camber acts like a spring to give you grip on all types of snow, pop when switching edges and acceleration on exiting turns.

Flex is the stiffness of the board between the front and rear. The flex of the Bullwhip 300 evo board is approximately 6/10, which is tolerant. This is a very even type of flex from the tip (nose) to the tail, which behaves very reliably and predictably in turns. However, at high speed or on very frozen snow, this board cannot hold a carved turn.

The torsional stiffness - the stiffness of the board between the feet, is about 4/10. This makes the board easy to handle and turn and forgiving of edge mistakes. Soft torsion for free movement between the feet. The front foot can be slightly angled heel/toe, and the rear toe/heel. Forgiving of edge errors, which is important for beginners.

The setback is when the board's compression points on the snow are not symmetrical in relation to the center of the board, but set back toward the rear. The bindings are also set back toward the rear by the same distance. 10 mm setback: classic setback for directional boards. It gives better stability in turns and lift in powder snow because the weight is at the tail of the board, which naturally makes the front rise.

All Dreamscape by Decathlon snowboarding products are tested under the actual conditions of use for which they were designed. In the snow, in the cold, in all conditions you may come across when snowboarding whether in powder, in the park or on the piste. The design teams check that the program for which the product was conceived and developed perfectly matches its use in the field.

Dry edges at the end of the day to prevent rust. Ideally, wax every 5 outings. Summer storage: keep away from sunlight, bindings can be left on the board.

Imported