Clay Pigeon Shooting Gilet CLAY900 designed for clay pigeon shooters.
Very comfortable clay shooting gilet thanks to the removable "Poron XRD" protective foam, extremely hard wearing thanks to the fabric inserts on the chest.
4 mm thick "Poron XRD" foam gives better recoil protection.
Removable foam protection for right- and left-handed shooters.
Freedom of movement
Side mesh and elasticated shoulders for freedom of movement.
Abrasion resistant fabric on chest.
The cut and fabric combination make the gilet more breathable.
4 front pockets, 1 large back pocket and 1 zipped side pocket.
Elasticated waistband for a more comfortable fit.
Their unique open cell structure helps XRD® materials to retain their qualities after prolonged use. The foam provides excellent recoil protection.
Microban® antimicrobial treatment prevents build up of bacteria.
Contains no latex, PVC or other solvents likely to irritate the skin.
Morphological adaptation thanks to microscopic technology.
Ergonomy, safety: evaluated according to EN ISO 13688 (2013).
Directions for use
This gilet ceases to be a protective garment if the foam is removed while shooting.
The garment must fit properly so that the foam is correctly positioned to receive the butt for maximum shock absorption.
- Wash the gilet at 30°C (foam must be removed)
- Do not iron
- Do not tumble dry
- Do not dry clean
Use restriction - This is a Personal Protection Equipment product, for non-professional use.
Wearing this product does not dispense the wearer from complying with current safety codes when clay pigeon shooting.
Do not use bleach.
Do not iron.
You are advised not to store products in a damp place. You should store them in a dry, well ventilated place to let perspiration on garments evaporate.
Do not store close to a source of heat.
Avoid any contact with chemicals.
Thanks to fabric inserts on chest (50%polyamide and 50% polyurethane).
Added mesh provides more stretch and comfort during movement.
Astragal fabric brings greater breathability and faster drying.
Freedom of movement
Cut aways on shoulders.
Mechanically elastic 2D mesh.
Inner chest pockets to suit left- and right-handers.
Composition: 90.0% Polyester, 10.0% Polyamide.
Will not tear.
Dimensions: 30 x 30 cm.
4 reinforced front pockets with bellows and press studs for more capacity (25 cartridges in each pocket). Very versatile chest pocket with zip for added safety. Rear game pocket.
Double ended zip
Convenient durable 8mm double-ended zip.
2 side loops for attaching accessories (ear defenders, gloves...).
The XRD foam inside the gilet has the ability to absorb recoil shock from the gun while you are clay shooting.
Test results show 49%* shock absorption
*Foam testing carried out in drop tower onto hard rubber base (control) reproducing shooting conditions of a 3.5kg shotgun using a 28g load cartridge.
The XRD foam inside the gilet has the ability to absorb recoil shock from the gun while you are clay shooting.\nTest results show 49%* shock absorption\n*Foam testing carried out in drop tower onto hard rubber base (control) reproducing shooting conditions of a 3.5kg shotgun using a 28g load cartridge.
Available in S to 3XL
Main fabric : 100.0% Polyester (PES)\r\nLining : 100.0% Polyester (PES)\r\nYoke : 50.0% Polyamide (PA), Yoke : 50.0% Polyurethane (PU)\r\nFoam : 100.0% Polyurethane (PU)\r\nLower Part - Main Fabric : 88.0% Polyester (PES), Lower Part - Main Fabric : 12.0% Polyamide (PA)\r\nPocket : 60.0% Cotton, Pocket : 40.0% Polyester (PES)
Wash the gilet at 30° (foam removed).
Clay Pigeon Shooting Gilet CLAY900 reviews