Endzone 500 Freestyle Snowboard Bindings Adult

Frame: 100.0% Polyamide 6 ; Strap: 50.0% Thermoplastic polyurethane, 25.0% Steel, 25.0% Leather

The Endzone 500 binding is a high performance all-mountain/freestyle snowboard binding to go anywhere: on-piste, off-piste and even in parks, at any level. Its high back is flexible, which makes it comfortable and forgiving of mistakes. Its full EVA pad guarantees good cushioning on landing after jumps.

Turn Strap System: the strap is mounted onto a hinge, which allows it to turn inward when you lift your foot.During boot entry, the space is free to introduce the boot into the binding without any discomfort. This also prevents the strap and the hooks from getting crushed with the boot.

The original settings are suitable for most users. But you can also adjust it as you see fit:- the position of the high back (front/rear/side) by moving the position of the screws that hold it - the length of the gas pedal, which is particularly useful for people with big feet.

The stance is the distance between the 2 bindings in cm.To be adapted to your body shape, but it is worth noting that all snowboards have a recommended position for bindings (recommended stance, indicated by a marker between the inserts of the bindings).If you feel the need to spread or position your feet closer together on the board, try it to see if you do actually feel better.

For on-piste/off-piste boards, if you want to position your feet closer together it is best to move only the front binding further back, and if you want to move your feet further apart it is best to move only the rear binding further back. The aim is to be a little further back to turn cleanly on the slope and float a little more on powder.For the freestyle boards (usually twin-tip, symmetrical board), it is better to move both bindings so that they are centered on the board.

For a piste-freeride program, we recommend +18° at the front and 0° at the rear. For versatile-freestyle use, prefer +18° and -6°. The openness of the rear foot gives more flexibility when riding switch. In pure freestyle use, do not hesitate to choose completely symmetrical angles, +15° and -15°, for example.Binding angles are very much a matter of personal choice. Feel free to check out what others are doing and try out different options. There can be some good surprises!

Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to center the boot on the snowboard and prevent the foot from protruding over the edge of the board too much, otherwise you will fall! Your boot must therefore protrude by an equal amount on both sides of the board. You can also rotate the disc through 90° to put more or less stance than that provided by the inserts. In this case, the bindings cannot be centered laterally.

For the Endzone 500 bindings, we recommend: M = US W 6.5 to 9.5 / L = US M 9 to 13.But just as you would always try on a shoe with your own foot, we strongly recommend trying on the bindings with your snowboard boots because, depending on the brand, a particular size of boot can vary in volume.

All Decathlon's Snowboarding products are tested in real conditions of use for which they were designed. Under the snow, in the cold, in all weather conditions when snowboarding on powder, in the snow park, or on the runs. Our design teams, product managers, engineers, and pattern makers ensure the product's design corresponds perfectly to its real-world use.

Regularly tighten the screws of the bindings.Storing for the summer: you can leave your bindings on the snowboard.

Imported