Hooded Waterproof Snowboard and Ski Jacket '

Main fabric: 100.0% Polyethylene Terephtalate ; Padding: 100.0% Polyethylene Terephtalate ; Lining: 100.0% Polyethylene Terephtalate ; Cuff: 80.0% Polyamide, 20.0% Spandex ; Rib fabric: 97.0% Polyethylene Terephtalate, 3.0% Spandex ; Coating: 100.0% Polyurethane

This kids’ snowboard jacket (or kids’ ski jacket, that works too) is designed to stop snow from getting inside: _ on the back: snow skirt and longline cut,_ at the cuffs (extremely exposed area): long sleeves and cuffs to protect the wrist,_ the neck: collar with a high gusset / hood with velcro to keep it rolled in high position, to protect the neck under the helmet.

This jacket has been designed, developed, and tested with the MI500 Kids Protect snowboard mittens, which go under the jacket so that kids can put the mittens through the sleeve on their own (from 8 years upwards - at 6, it's still complicated).Then there are a host of features to keep the snow out 1. jacket sleeve with thumb loop to prevent the sleeve riding up,2. the mitten reaches high up the wrist3. the jacket sleeve then covers everything.

This jacket has a 100 g/m² fill with a brushed polyester lining for warmth.

As well as the waterproof fabric, we enhance the waterproofing of our kids' snowboard jackets, or our kids’ ski jackets, with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. Only the main seams on the shoulders are taped on this SNB JKT100 jacket.

This Decathlon kids’ snowboard jacket is designed for occasional snowboarding, nevertheless it has 4 pockets: _ 2 side pockets secured with a zipper fastening,_ 1 secured inside pocket with a velcro fastening_ 1 skipass pocket on the left sleeve secured with a velcro fastening.

Falls happen when snowboarding and snow can enter the jacket. To limit this unpleasant experience, the collar and hood were designed together.So that the hood can be used as a scarf and keep the snow out, fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet.The collar should be closed normally, up to the top, to tighten the jacket.

The hoods of the SNB JKT100 jackets is not designed to be worn over the helmet. This function is available on SNB JKT500 jackets.

All the Dreamscape snowboard products are tested in the real-life conditions of use for which they were designed: in the snow, cold, and all the conditions encountered when snowboarding and skiing. Our design teams, product managers, engineers, and pattern makers make sure that the program for which the product is designed perfectly matches its use in the field.

Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.

Imported