Hooded Waterproof Snowboard and Ski Jacket Girls'

Main fabric: 100.0% Polyamide ; Lateral fabric: 100.0% Polyethylene Terephtalate ; Lining: 100.0% Polyethylene Terephtalate ; Padding: 100.0% Polyethylene Terephtalate ; Cuff: 80.0% Polyamide, 20.0% Spandex ; Coating: 100.0% Polyurethane

This snowboarding jacket is designed to reduce snow ingress: _ on the back: snowskirt and long cut that enables you to sit on it, _on the cuffs (very exposed area): long sleeves and cuffs with thumb holes to prevent snow ingress, _the neck: collar with a high gusset / hood with velcro to keep it rolled in high position and protect the neck The hood can also be worn over the helmet.

For warmth, this jacket has 2 different fills to perfectly meet the need for heat:_ 150 g/m² for the body, with a fleece lining, _ 100 g/m² on the sleeves.

In addition to the waterproof fabric, we enhance the waterproofing of this snowboarding 500 jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. 100% tapes seams on this product.

The water-repellent treatment applied to its outer surface makes water run off the fabric without seeping in. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof jackets that we design for snowboarders are water-repellent.

This Snowboarding jacket is designed for regular snowboarding, so it has all the pockets required: _ 2 side pockets secured with a zipper fastening,_ 1 secured outer pockets secured with a zipper fastening, _1 inside pocket secured with a zipper fastening, with earphone outlet, _1 skipass pocket on the left sleeve secured with a zipper fastening.

Falls happen when snowboarding and snow can enter the jacket. To limit this unpleasant experience, the collar and hood were designed together.So that the hood can be used as a scarf and keep the snow out, fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet.The collar should be closed normally, up to the top, to tighten the jacket.

The hood of this jacket is designed to be worn above the helmet, in high winds or heavy snowfall, ...In this position, open the collar of the jacket by 4”, place the hood above the helmet, and close the collar using the gusset (velcro fastening). The gusset shelters the mouth and nose.

This product is guaranteed for 5 years from the date shown on the sales receipt. A product covered by the warranty will be repaired or exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

We guarantee our products 5 years and will repair it with local professionals if you unfortunately damage it. Contact us through our website to find out more about what you need to do to have your product repaired. We take particular care in choosing all the elements and assemblies that make up our products, so that they are as durable as possible for snowboarding use.

All Decathlon's Dreamscape Snowboarding products are tested in real conditions of use for which they were designed: in the snow, cold, and all the conditions encountered when snowboarding and skiing. The design teams, product managers, engineers, and pattern makers check that the program for which the product was designed and developed perfectly matches its use in the field.

Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.

Imported