MH120 Mid Waterproof Hiking Boots Kids' 10 - ad. 2

Outer sole of: 100.0% Styrene Butadiene Styrene ; Upper of: 55.0% Polyurethane, 45.0% Polyester ; Lining and sock of: 100.0% Polyester

The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate (0.6 for this model) on different surfaces (smooth, rugged, dry, wet). To validate these tests, we also assess the quality of our soles on the field, in the mountains, by a panel of young testers.

Tested both in the lab and real-world usage, this footwear guarantees optimum waterproofing and breathability. To start, they are immersed in water with pressurized air inside to check that no bubbles form on the surface of the boot. Next, the boots are fitted to a mechanical arm that simulates walking and half immersed in water so we can test whether the inside remains perfectly dry.For this model, the test lasted the equivalent of 2.5 miles under the conditions mentioned above.

A boot's waterproofing is often undermined by water getting in from the top of the boot. Using waterproof gaiters or mini gaiters is therefore recommended to keep your feet dry for longer by protecting the top part of your boots and prevent water from getting in as well as pebbles, sand, etc.Use of a re-waterproofing spray is recommended several times per year. This will help your boots recover their original water-repellent qualities and combat outer stains.

For hiking, do not hesitate to buy 1 size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the boot. Tip: Keep your toenails short, and before going downhill at any time, check that your laces are tight enough to stop your feet from slipping down toward the front of the boots.

Allow kids to try on both boots, standing up, with the socks worn for hiking. Check 2 comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying boots on.Gradually start using your boots during your 1st few hiking trips to break them in. You can find and print the pedometer and check the length of your kid's foot.

Removable insole for faster drying. It can also be replaced by an orthopedic insole.

Because we are aware that we must act to preserve our playground, Quechua is committed to limiting the environmental impact of its products. Today, this product is not eco-designed, but we work every day to make it more responsible: Eco-design, repairability, and durability are at the heart of our development process.

Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple, and technologically advanced. We then test them ruthlessly in the field, because we believe that the only way to continually improve is to conduct tests in the real-life conditions that kids will experience.

Store in a dry, ventilated place

Imported