Quechua SH100 Warm Waterproof Snow Boots Kids'

Outer sole of : 100.0% Styrene Ethylene Butadiene Styrene Upper of : 100.0% Polyester cationic Lining and sock of : 100.0% Polyester cationic Warm lining : 100.0% Polyester cationic

We chose a warm lining that has insulation to give you effective protection from the cold.Based on the field and lab tests carried out with a panel of users to measure perceived cold, we gauge the thermal insulation of our shoes. It is therefore possible to accurately know down to which temperature your shoes are protecting you. The comfort temperature ratings are given for the shoes: 27°F for this model.

Your boots were designed with a mid-height 100% waterproof cradle to protect the part of the foot that is most in contact with the snow. The textile upper is water-repellent and warm to ensure good protection against the cold and the snow that gets inside your boots.

We have checked that your boots are waterproof with laboratory tests that simulate walking with feet half immersed in water and with wear and aging tests in the field. During the waterproofing test, we test 3 levels of impermeability: 2000 flexes (about 2.5-mile walk), 4000 flexes (about 5-mile walk) and 8000 flexes (about 10-mile walk). Your boots were tested to 8000 flexes, which is equivalent to 10 miles of walking.(NB: The upper is water-repellent)

The grip of the boots is linked to the crampons, their number and shape. Traction depends on the materials and ridges used on the soles, like your car's tires. Traction optimizes propulsion, prevents the boot from slipping backward when going uphill and stabilizes the boot.Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving grip to the sole.

Equipped with SNOWCONTACT soles, your boots are designed for maximum grip comfort for hiking and traction on snow. The location and height of the crampons (3 mm) are spaced strategically for optimal grip when hiking on snow. The surface and design of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to not slip.

Our team of designers is based at the foot of Mont-Blanc, in Haute-Savoie (France). All year round, we create and develop beautiful, simple and technically advanced products. These are then tested in the field because we believe that the only way to continually improve our products is to test them under the real-life conditions that you will experience.

Store your products in a well-ventilated room away from light and moisture.

Imported