Shopping Cart
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500
Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500

Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500

3/2 mm neoprene. Glued and blind-stitched seams to help keep water out.

4 / 5

Regular price

$89.99

Tribord

Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500 designed for regular dinghy/catamaran sailing in cool and cold weather (light sailing)

Neoprene wetsuit to keep you warm in a dinghy thanks to its thickness and efficient seams! It makes movements easier with its cut and elasticity. Resistant to friction against the boat
Thermal insulation

3/2 mm neoprene. Glued and blind-stitched seams to help keep water out.

Abrasion resistant

Wear-resistant anti-abrasive reinforcements on seat, backs of thighs and knees.

Freedom of movement

Cut suitable for the trapeze position Separate pieces on the arms and torso.

User comfort

Comfortable thickness on knees: 7 mm, with multi-layer stretch neoprene

Easy to use

SIZE MARKINGS: marked inside for visibility when turned inside out after drying.

Easy to put on

Zipper at the back with a pull tab to make it easier to open and close.

Quick dry

Polyester inner lining.

The concept of thermal insulation using neoprene:

By trapping a thin layer of water around the body, a neoprene wetsuit works in 2 ways: 1. The water trapped inside the wetsuit gradually warms up 2. Heat transfer from the body decreases. The wetsuit and the thin covering of water form a layer of insulation. Neoprene is a closed-cell elastomeric foam with trapped nitrogen bubbles that have insulating properties.

The technical GBS design of the DG500 dinghy/catamaran neoprene wetsuit is intended for cool and cold weather:

The Tribord DG500 neoprene wetsuit is made of 100% neoprene (thickness: 3 mm) to ensure optimal thermal insulation. All seams are sewn together with strong thread suited to this particular type of fabric and are glued to prevent water getting through the seams (GBS). A neoprene strip is sewn under the zipper to reduce the cooling effects of any water that gets through it. In the event of moderate to strong winds and cold weather, also wear the Tribord S500 sailing smock

Freedom of movement of the DG500 dinghy/catamaran neoprene wetsuit:

The Tribord DG500 dinghy/catamaran neoprene wetsuit has a cut and materials designed to make the movements and different positions of sailing much easier. The arms and chest piece consist of a different piece of fabric to make maneuvers and movements much easier. The legs, buttocks and knees are also separate pieces to make sitting, crouching and changing sides in the boat much easier. All the seams are stretch seams.

Neoprene reinforcements on the DG500 wetsuit on the knees, buttocks and thighs:

It has reinforcements on and below the knees and on the seat and thighs. The thickness is 7 mm on the knees for added comfort. The additional fabric works in 2 ways: - to reduce the wear and tear of the neoprene in areas that are the most exposed to friction on the boat (deck fittings, rubbing strake, carpet, etc., depending on the craft) - to reduce the discomfort of this friction on the knees, seat and thighs for the user wearing the suit and moving around on the boat

Construction of the neck of the DG500 dinghy/catamaran neoprene wetsuit:

The neck finish and height has been developed to limit the sensation of discomfort from the neoprene and irritation on even the most sensitive skin. However, not everyone's skin reacts in the same way: in this case, we recommend that you wear a top under the wetsuit to reduce sensitive rubbing and chafing.

Product Testing

Developed and tested by our design teams in Hendaye, France. Tested by the 47°Nautik sailing school (Gulf of Morbihan, Brittany - France) during the 2016 season.

Composition

Foam : 100.0% Rubber - Chloroprene - Neoprene Lining : 100.0% Polyester cationic

Storage Instructions

Once dry, store on a hanger away from direct sunlight. Rinse with fresh water to remove salt that could deteriorate the neoprene and the zips. Avoid direct heat sources. Hand wash recommended.

Origin

Imported

Model Code

8383864

Men's Sailing GBS 3/2 mm Neoprene Wetsuit Dinghy 500 reviews

Sort By Write Review

Recently Viewed Products

 

Size Guide Visual