Wedze Evofit 550, Piste Ski Boots, Men's

Fitted with the EVOFIT liner, this boot adapts extremely well to all body shapes: the instant FIT is excellent and can be improved by thermoforming the entire liner! The Overlap system of the liner ("wallet" type) also helps to change the weight distribution, provides good acceleration, and makes them easy to get on/off.

This boot is equipped with 4 extremely robust aluminum micro-metric hooks. You can adjust the length of the buckle by tightening or loosening the hook. The top hook has 3 positions (adjustment without tools) for every calf size. A wide adjustment strap at the top of the upper provides powerful and easy tightening of the top of the shell.

To provide an indication of boot rigidity, brands assign a flex rating to every boot. This figure indicates the rigidity of the boot: the higher the figure, the stiffer the shell. A flex of 60-70 is considered best for skiers at beginner level. A flex from 70 to 100 is for intermediate skiers. Beyond this value, the products are aimed at advanced skiers. Well-built skiers can go up 1 level.

Once the foot is in the boot, fasten the buckles to the midpoint. Can you go further? This means the volume of the boot isn't right for you. Once the boot is closed, you must flex the boots 3 times by pressing hard on the shins (put your hands on your knees to help) and push your heel backward inside the boot. Stand upright: your foot should touch the end of the shell. When you flex, your foot should move backward so you can no longer feel the end.

1- Choose a technical ski sock that's thin so it prevents pressure points and promotes blood circulation in the foot. 2- Choose a sole that is suited to the shape of your foot so that it doesn't get squashed or pressed up against the shell. Ask a store assistant for advice. 3- If after 2 days of skiing, you still feel some discomfort, thermoform your liner.

The EVOFIT liner consists of 100% thermoformable foam, which can be heated to mold to the shape of your feet and the shell of the boot. This improves the foot/liner/shell compatibility, thereby reducing areas of discomfort.

1- Preheat the convection oven to 175°F. 2- Remove the liners from the shells. 3- Remove the insoles from the liners. 4- Put the liner part only in the oven for 10 minutes. 5- Remove the liners from the oven. 6- Put the insoles back inside the liners. 7- Put the liners back in the boots. 8- Put the boots on and lightly fasten each hook. 9- Wait for 15 minutes at room temperature before taking them off. You are ready to ski!

1- Air your boots by removing the liner that is inside the plastic shells. 2- Fasten the hooks at the 1st notch to prevent the boots from becoming deformed and, if possible, store them in a boot bag. 3- If possible, store them in a dry place where the temperature will not drop below 14°F. This will protect the plastic of the boots.

Imported

All Wedze products are created, designed, and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc.) The design teams make sure that the program, for which the product is designed and developed, corresponds perfectly to its use in the field.

Dry your boots before storing them. Store them with the hooks closed in a ski boot bag in a warm room.