Wedze 500 Down Insulated Waterproof Ski Jacket Men's

Main fabric: 100.0% Silicone ; Main lining: 100.0% Silicone ; Secondary lining: 100.0% Polyamide ; Padding: 50.0% Grey Duck Feather, 50.0% Grey Duck Down ; Membrane: 100.0% Polyurethane

Recognized for their high thermal insulation, down and feather also provide an excellent weight/warmth/compression ratio. However, remember that the warmth provided comes from the combination of the weighting of down/feathers and the filling power of the jacket. Together, they provide you with warmth and insulate you from the cold. (Padding 50% down and 50% feathers in the body, recycled fill 3.5 oz/m² at the bottom of jacket and arms, 2.1 oz/m² on the collar).

As well as its filling, your jacket's waterproof zippers, snow skirt, collar, and adjustable hood and cuffs offer better protection against the cold for a warmer feeling.

The membrane is an extremely thin component applied to the inner surface of the jacket’s outer fabric. This hydrophilic component prevents water from seeping in while wicking away the perspiration produced by the body. The membrane is essential when it comes to staying warm and dry.

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 8000 mm is therefore resistant to the pressure exerted by a 8000 mm column of water.

The 500 jacket was rigorously developed and assembled to stop water from getting in and to prevent wind chill, so you can brave the bad weather (rain, snow, wind, etc.). To check its water-resistance, this jacket was placed under a special shower, to reproduce the conditions faced by a skier. We have checked the waterproofness of this product in use in various weather conditions over several days.

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.

Remember that water repellency can be restored. To do this, you can use a waterproofing spray (sold in our stores): spray the product evenly over the entire garment, then allow to dry for 10 to 12 hours).

This garment wicks away the water vapor produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardized ISO 11092 test. The lower the RET, the more breathable the fabric. The 500 jacket has a RET of 11. However, it's the technical solutions (zippers, vents, mesh) Wed’ze uses that reduce the condensation inside the garment and maximize breathability.

Regular fit. The jacket has sides that fall straight and remain parallel without trying to follow the shape of your chest. The inner volume lets you wear this jacket with a 1st and 2nd technical layer.

All Wedze products are created, designed, and developed in the Mont Blanc Valley. They are then tested under identical usage conditions to those you will encounter yourself (in the snow, cold and powder snow, etc.). The design teams make sure the program for which the product is designed and developed matches perfectly with its use in the field.

Store on a hanger and do not fold as this can damage the waterproof fabric. Dry thoroughly before storing in a dry, well-ventilated place.

Imported