Men's Mountain Backpacking Boots 100 designed for for the trekker walking on vehicle suitable roads.
Trekking amateurs, discover these light trekking shoes with high upper, designed for walking. Perfect for long treks on vehicle-suitable roads!
Waterproof membrane tested on 10 mi walk in the water until mid-upper.
2 top hooks and 1 blocking hook - sole supporting roll of the foot.
CrossContact sole supporting grip on hard and wet ground.
17.85 oz per pair in size 9!
PU cushioning:durable and high-performance.
Footwear waterproofing test: tested in laboratory and actual usage conditions, the shoes are equipped with waterproof and breathable coating to provide optimal protection from rain. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.
3 levels of waterproofing
During the impermeability test, 3 levels of impermeability are tested: 2000 flexions (approximately 2.5 mi walk)
4000 flexions (approximately 5 mi walk)
8000 flexions (approximately 10 mi walk). Of course, after this test or in use, the shoe regains its original waterproofing once dry.
The TREK 100 shoe is validated on the impermeability test in 8000 flexions or 10 mi walk in water up to mid-upper.
Laboratory tests were conducted to test the following elements: - wrenching of hooks and eyelets
- joining of the sole
- resistance to UV
- abrasion of the sole and upper components
- accelerated aging.
Try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: the base of the heel and the front part of the foot going down.
Avoid all pressure points during fitting. Don't hesitate to walk around the store.
Progressively use your shoes during the first few walks to get your feet used to the shoes.
All our shoes are tested for user comfort and comfort in use, by a panel of users and in identical conditions to those you will encounter in use. Moreover, our "Missions Tests" put the product manager in contact with people who are not affiliated with Quechua to test, develop and validate the products.
Sole : 60.0% Thermoplastic polyurethane, Sole : 40.0% Polyurethane\r\nTopsheet : 50.0% Polyester cationic, Topsheet : 30.0% Bovine leather, Topsheet : 20.0% Polyurethane\r\nLining and sock of : 100.0% Polyester cationic
Not suitable for mountaineering.
Store in a dark, dry and well-ventilated place.
Use the brush and/or sponge to clean the shoe and remove dirt or mud residue. Always brush in the same direction to give nubuck its original look.\nThe use of cream or waterproof grease on split leather is not recommended. While it will not damage the leather, it will change the aspect of your boots.
Men's Mountain Backpacking Boots 100 reviews