Men’s Nature Hiking Boots Mid Waterproof NH300 designed for half-day’s nature hike, in all weathers and on easy paths. for occasional use.
Entry-level men’s waterproof hiking boots help you get about with confidence on uneven tracks. Their rubber sole improves their lifetime and grip.
Cross contact outsole with 4mm studs and a design adapted to natural trails
Honeycomb sole and sockliner made of 5 mm polyurethane (PU) foam.
Breathable and waterproof membrane keeps your feet dry. 2-hour test.
"Mid" upper with lacing on the top of the upper for good support.
450 g per boot in size 8.5.
Life cycle comparison: Boots — sustainability.decathlon.com
The footwear is laboratory and field tested equipped with membrane to ensure optimal waterproofing and breathability. First immersed in water under air pressure, we check the absence of bubbles on the surface of the boot. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.
3 levels of waterproofing
During the waterproofing test, we test 3 levels of impermeability, ie 2000 flexes (about 2 hours of walking), 4000 flexes (about 4 hours of walking) and 8000 flexes (about 8 hours of walking). Of course, after this test or in use, the shoe regains its original waterproofing once dry.
Boot’s level of waterproofing.
The NH300 Mid men’s boot is waterproof for 2000 flexes.
All our shoes are tested for initial comfort and comfort in use by typical users and under the same conditions you find in use. Our Test Missions combine the product manager with non-Quechua-affiliated people to test, develop and validate products.
Other laboratory tests are also conducted to validate the following elements: tearing of eyelets and straps, bonding, toxicology, UV resistance, abrasion of sole and upper components, accelerated ageing.
What size should I choose?
For hiking, don’t hesitate to choose one size above your usual shoe size to ensure optimal comfort going downhill and avoid toes hitting the end. Tip: keep your nails short and, before making your descent, check that your lacing prevents your foot from sliding towards the front of the boot.
Try on both shoes, standing up, with the socks worn for hiking. Try on several models or sizes if necessary. Check two comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying them on. Don't hesitate to walk around the store. Use your boots progressively during their first hiking trips to mould them to your feet.
All our shoes are tested for initial comfort and comfort in use by typical users and under the same conditions you find in use. In particular, our Test Missions bring the product manager together with people who are not affiliated to Quechua, to test, develop and validate the products.
Outer sole of : 100.0% Rubber - Butadiene Rubber (BR)\r\nUpper of : 50.0% Polyamide (PA), Upper of : 30.0% Polyurethane (PU), Upper of : 15.0% Polyester (PES), Upper of : 5.0% Elastane\r\nLining and sock of : 70.0% Polyester (PES), Lining and sock of : 30.0% Polyurethane (PU)
Not suitable for mountain hikes.
Store in a dark, dry and well-ventilated place.
Men’s Nature Hiking Boots Mid Waterproof NH300 reviews