Wedze EvoFit 900, Downhill Ski Boots, Men's

This boot is ideal for advanced skiers looking for the right performance/comfort/tolerance mix. The 900 Evofit boot has a PU shell for a progressive and constant 110 flex in all temperatures. The liner's overlap system allows very good support transmission and easy entry. The Evofit liner offers optimum comfort, improved by thermoforming the entire liner!

This boot is equipped with 4 micro-metric aluminum hooks. You can adjust the buckle length by screwing or unscrewing the hook. The top hook has 3 positions (tool-free adjustment) to fit all calf sizes. A wide strap for very strong closure at the top.

To provide an indication of rigidity, brands assign a flex rating to every boot. This figure determines the rigidity of the boot: the higher the figure, the stiffer the shell. A flex of 60 to 70 is designed for beginners. A flex from 70 to 100 is for intermediate skiers. Beyond this value, the products are aimed at advanced skiers. Well-built skiers can go up 1 level.

Once your foot is in the boot, fasten the buckles to the midpoint. Can you go further? This means the volume of the boot isn't right for you. Once you've fastened your boots, you need to flex 3 times while pushing your calves forward (put your hands on your knees), which will push your heel back into the boot. Stand up: your foot should touch the end of the shell. When you flex, your foot should move backward so you can no longer feel the end.

1- Choose a thin technical ski sock to avoid pressure points and promote blood circulation in the foot. 2- Choose an insole that suits the shape of your foot to prevent toes from getting crushed and pressing against the front of the shell. Ask for advice in store. 3- If, after 2 days of skiing, you still feel discomfort, thermoform your liner.

The EVOFIT liner consists of 100% thermoformable foam, which can be heated to mold to the shape of your feet and the shell of the boot. This improves foot/liner/shell compatibility, hence reducing areas of discomfort.

1- Preheat the convection oven to 175°F. 2- Remove the liners from the shells. 3- Remove the insoles from your liners. 4- Put the liner part only in the oven for 10 minutes. 5- Remove the liners from the oven. 6- Put the insoles back inside the liners. 7- Put the liners in the boots. 8- Put on your boots and tighten each hook to the middle notch. 9- Wait for 15 minutes at room temperature before taking them off. You're now ready to go skiing!

1- Air your boots by removing the liner inside the plastic shell. 2- Close the hooks at the 1st notch to prevent the boots from losing their shape and, if possible, store them in a case. 3- Keep them in a dry place if you can, and somewhere where the temperature will not drop below 50°F. The boot's plastic will thank you for it!

Imported

All Wed'ze products are designed and developed in the Mont Blanc Valley. They are then tested under identical usage conditions to those you will encounter yourself (in the snow, cold and powder snow, etc.). The design teams make sure the program for which the product is designed and developed tallies perfectly with its real-world use.

Dry your boots before putting them away. Store them with the hooks closed in a ski boot bag and in a warm room.