Men's Sailing Jumpsuit 100 designed for occasional inshore sailors. 3 to 4 half days of sailing per year in moderate rain.\n
These waterproof and breathable salopettes with fully taped seams provide excellent waterproofing against downpours and waves that come over boat decks.
3 hours under moderate rain (> 5000 mm). Fully taped seams. Water repellent.
Salt water resistant
Injected plastic zipper. Fabric anti-oxidation treatment
Very breathable coating (RET<12)
Easy to use
Elasticated, adjustable straps and elasticated waistband.
- Coated fabric
- >5000 mm of water pressure.
- Fully taped seams.
- Adjustable straps.
- Bottom of the legs adjustable by rip-tab strips.
- Tested under a simulated moderate rain shower (100 L/hr/sqm) for 3 hours
RET <12: very breathable.
To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapor produced by the body during exercise to escape.
RESISTANCE TO WEAR
- Injected plastic central zipper resistant to salt oxidation.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY \nstep 1: before washing
Close all zippers and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY \nstep 2: washing
You can wash your jacket on a synthetic cycle at 86°F or 104°F with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach.
Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.
Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY \nstep 3: drying
Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
HOW TO REACTIVATE THE JACKET'S WATER REPELLENCY
If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a waterproofing spray or detergent sold in our stores.
Main fabric : 100.0% Polyamide\r\nMain lining : 100.0% Polyester cationic
Store in a dry place, but do not leave your garment on a heat source such as a radiator, as this may damage the waterproof membrane or coating.
Machine wash your Kostalde Men's waterproof sailing salopettes at 86°F. Turn inside out and fasten the velcro. Choose a long rinse and gentle spin cycle. Line dry if possible. Occasional tumble drying on low for a short period of time will improve the water repellent treatment. To reactivate the water repellency, you can also warm iron the fabric (max 284°F) or apply the Tribord re-waterproofing spray.
Men's Sailing Jumpsuit 100 reviews