Shopping Cart
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm
Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm

Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm

7.5 mm neoprene with hood

4.4 / 5

Regular price

$149.00

Subea

Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm designed for regular scuba divers in waters between 50°f and 65°f.

A 7.5 mm wetsuit with high thermal protection that keeps you nice and warm when diving in cold waters.
Thermal insulation

7.5 mm full wetsuit\nTaped seams and GBS (glued and blind stitched) assembly.

Easy to put on

100 neoprene with front zip fastener.\nAttached hood.

Waterproof

Smooth edged cuffs and ankles for maximum watertightness.

Abrasion resistant

Ergonomic knee reinforcements.

Anatomic design

Anatomical cut without stitching under the arms.

Details on thermal insulation

7.5 mm full one-piece wet type with front zip.
Seams taped using a GBS (glued and blind stitched) assembly.
Smooth edged cuffs and ankles for maximum watertightness.
Once a thin layer of water (that enters through the zip) gets trapped between you body and the wetsuit, the water stays warm as it is not replaced. This thin layer of water keeps you warm.
Weight of the wetsuit (size L): 4.4 lbs

GBS (glued and blind stitched) assembly

First, the neoprene is bonded, and then stitched for maximum resistance to abrasion. A specific stitch is used: the needle does not pass completely through the neoprene to prevent water from entering the jacket when diving.

Thermal performance class

This scuba diving suit provides thermal protection that has been tested by the independent INPP institute in order to validate its compliance with the current standard (EN 14225-1: 2005).

This suit is certified CLASS B

A (+7°C/+12°C / +45°F/+54°F)
B (+10°C/+18°C / +50°F/+64°F)
C (+16°C/+24°C / +61°F/+75°F)
D (+22°C/+30°C / +72°F/+86°F)

Adjust your warmth and the thickness of your suit!

When diving, cold is your worst enemy!
Using the right thermal protection based on the water temperature, is essential.
To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature.
In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1mm under-shorty or a 5.5 mm over-shorty.

What is a wet wetsuit?

This is the most common type of diving wetsuit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside.
Made of neoprene - a rubber polymer filled with air bubbles - these wetsuits are available in thicknesses of 0.5 to 7.5 mm.
Thanks to their suppleness and modularity, they constitute excellent diving wetsuits.

Tips on how to get into a wetsuit

Put your foot in a plastic bag. Then put your leg into your wetsuit. Your foot comes out completely and smoothly!
To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene wetsuit, immediately separating it from your skin. You can then easily proceed with the final adjustments.

Tips on how to take care of your wetsuit

1) After each session, soak the wetsuit in clean water, on the outside and the inside
2) Use a bactericide solution to clean
3) Rinse thoroughly in clean water
4) Dry on a large hangar in a well ventilated place in the shade.
Caution: the sun will cause the colors of the textile parts of the wetsuit to fade and speeds up the aging process of the neoprene.
Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.

Weight of the wetsuit

Size L: 4.4 lbs

What is the SUBEA brand?

What is the SUBEA brand?

Product Testing

Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.

Composition

Foam : 100.0% Rubber - Chloroprene - Neoprene\r\nLining : 100.0% Polyamide

Restrictions

swimming

Storage Instructions

Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.

Guarantee

2 Years

Origin

Imported

Model Code

8354122

Men's Scuba Diving Cold Water Wetsuit SCD 100 - 7.5 mm reviews

Sort By Write Review

Recently Viewed Products

 

Size Guide Visual