26"-27.5"-29" Mountain Bike Rigid Front and Rear Mudguard Kit

This mudguard kit stops mud getting sprayed onto riders' lower backs, chests and faces. You can't completely avoid muddy splatters when it's damp... But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels). Or, if you want total protection and have a compatible bike, then get yourself a city bike mudguard kit (with a much fuller blade that attaches using stays).

This mudguard kit fits all 26" to 29" mountain bikes equipped with a telescopic fork, including 27.5+ bikes, with tires up to 2.8" wide in 27.5" and 2.6" wide in 29". To ensure a good fit for the front mudguard, the internal diameter of the steerer tube must be between 18 and 34 mm. To ensure a good fit for the rear mudguard, the diameter of the seat post must be between 25.4 and 34.9 mm.

The front mudguard comes fully assembled and ready to be mounted, with a medium expansion socket. To make this product compatible with as many different suspension forks as possible, there are 2 additional expansion sockets (the smallest and the biggest size) included in this kit. The rear mudguard comes fully assembled and ready to be mounted, no matter the diameter of your seat post.

You'll need a 2.5 mm Allen key. To mount the bracket, choose the appropriate expansion socket based on the inner diameter of the steerer tube: - Small 18 mm socket - Medium 23 mm socket - Large 33 mm socket The mudguard can be moved forwards by choosing the most appropriate hole on the bracket. The mudguard's blade then easily clips onto the bracket.

You'll need a 4 mm Allen key. There are 2 screws for mounting the bracket to the seat post. The angle of the blade can be adjusted to make it sit as close as possible to the wheel.

With dimensions that fit all the new wheel and tire sizes on the market, and with a bold design, our mudguard kit gives your bike a modern, dynamic look. Everything has been designed to give you the best experience: - A reliable screw-on bracket that holds the mudguards in the same position each time - An easy system to clip the blades onto and take them off your bike depending on the weather - Compatibility with accessories (camera, lights)

In dry weather, when there's no rain and mud about, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system. To keep you safe when riding early in the morning or late at night, there's a rail at the end of the blade that you can clip a CL100 LED rear light to. Product ref: 8538019.

Front: Blade length: 553 mm Blade width: 73 to 97 mm Total weight: 4.2 oz Rear: Blade length: 497 mm Blade width: 73 to 95 mm Total weight: 8.1 oz

Imported