Mountain Bike Stiff Bead Tire designed for occasional and regular mountain biking on dry terrain.
Excellent value-for-money mountain bike tire.
The knobbly tread optimizes power transfer on dry and rolling terrain.
Designed for good resistance to punctures.
Numerous knobs for good performance.
For 26" inner tubes and wheels.
1.8 lbs. Stiff bead.
Tube type: standard tire to be mounted with an inner tube.
How to measure tire wear?
To measure the wear on your tires and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the terrain you are cycling on and therefore determines your tire's performance.
A tire needs to be changed when the center knobs are worn down to the same height as the side knobs.
How to remove a tire
To remove your tire, first deflate the inner tube until no more air comes out. Once deflated, use a tire lever to remove the tire from the rim.
How to fit a tire
To put the tire back on, place one side of the tire into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tire (inflating it beforehand reduces the risk of pinching the inner tube).
Then, place the other side of the tire into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tire and the rim.
How to inflate your tire correctly
Inflate your tire with caution. The recommended pressure is indicated on the side of your tire as well as on its product sheet (available online).
Before each outing, make sure that your tires are at the correct pressure for your ride.
Tip from the pros
When inflating your tire, be sure to inflate it to the correct pressure for the terrain you will be riding on and especially the weather conditions.
When riding in rainy weather, lower the tire pressure to increase the tire's traction.
On the other hand, when riding in dry weather, you can increase the pressure for better performance.
At B'Twin we create the tires of tomorrow. designed by our engineers at our research & development lab at our international headquarters in Lille, France.\nThe tire is then tested in our laboratories as well as in real world by our professional cycling team to ensure outstanding quality. This expertise is specified on our range of B'Twin tires with the label "DESIGNED IN FRANCE".
Structure : 50.0% Rubber - Synthetic, Structure : 50.0% Rubber - Natural Rubber - Latex
Inflate to the recommended tire pressure printed on the sidewall
This is a stiff bead tire. To avoid damaging it, do not fold it. Store it in its original shape.
Mountain Bike Stiff Bead Tire reviews