Quechua MH500, Hiking 40 + 10 L Backpack, Kids'

- 2 bottle holder pockets - 1 secure side pocket for a map - 1 interior bag divider (dirty clothing or shoes) - 1 front pocket for a jacket - 1 belt pocket for a smartphone - A cover that can be adjusted on 2 back height levels with an inside pocket and an outside pocket - luggage tag that is visible from the outside - access to the bottom of the bag and over the entire height - elastic on top for a foam mattress - whistle buckle at the chest - reinforced bottom

Bag designed to incorporate a water bladder, with the outlet for the hose (not supplied). Accessory that allows kids to hydrate regularly while hiking.

1 - Adjust the back height adjuster to the kid's height in cm (remove the rip-tab and then pass it through the loops of the desired colors). 2 - Loosen all the straps (shoulder straps, belt, load adjuster straps). 3 - Put the backpack on. 4 - Tighten the shoulder straps. 5 - Adjust the load adjuster straps as needed.

Put your bedding at the bottom. Place the heavy equipment close to your back. Pack your clothes around these items. The groundsheet can be placed under the elastic above the cover. Keep a waterproof and/or fleece jacket within reach with the elasticated pocket on the front. Put the small belongings that you will use during the day (sunblock, map, sunglasses, etc.) in the pockets. The water bladder (not supplied) can be placed in the compartment generally provided down the back.

The guarantee covers any backpack faults, except those caused by normal wear and tear and improper use. This special 10-year guarantee can only be granted upon presentation of the product and receipt. If the product is covered by the warranty, it will be repaired or exchanged free of charge. This commercial guarantee does not affect any statutory guarantees that are applicable in the country/state of purchase.

Because we are aware that we must act to preserve our playground, Quechua is committed to limiting the environmental impact of its products. Today, this product is not eco-designed, but we work every day to make it more responsible: Eco-design, repairability, and durability are at the heart of our development process.

Our design team is based at the foot of Mont Blanc in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple, and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.

Imported

We complete laboratory tests to certify materials: fabrics, buckles, straps, foam, zippers... for example, for a fabric: resistance to abrasion and tearing, color-fastness in UV light, resistance to washing, waterproofing, etc. A test is then conducted on the product replicating the accelerated demands on the backpack over a number of years to check the strength of the assembly: the backpack is weighted, then placed on a dummy that reproduces the movement of fast walking over thousands of cycles.

Store the backpack in a dry place