SH500 X-Warm, Waterproof High Snow Boots, Women's

We chose a warm lining that has insulation to give you effective protection from the cold. We tested it in the laboratory and in the field with our user representatives. We checked the temperature down to which it stays comfortable when you're stationary and when you're walking, as this varies a lot: 23°F when static and 0°F when moving. We also took into account how temperature is felt differently by men and women.

Your boots have been designed with a 100% waterproof low cradle to protect the part of the foot most in contact with the snow. The textile upper is water-repellent and warm to give you good protection against cold and snow ingress.

We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. During the waterproofing test, we test 3 levels of waterproofing: 2,000 flexes (about 2.5-mile walk), 4,000 flexes (about 5-mile walk), and 8,000 flexes (about 10-mile walk). Your boots were tested to 8,000 flexes, which is equivalent to 10 miles of walking. (N.B.: The upper is water-repellent)

The boots’ traction depends on the number and shape of the studs. The grip is dependent on the materials of the sole and the tread pattern, like the tires of your car. Traction optimizes propulsion, prevents the boot from slipping backward when going uphill, and stabilizes the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.

Equipped with SNOWCONTACT soles, your boots are designed for maximum grip comfort for hiking and traction on snow. The location and height of the studs (3.5 mm) are spaced strategically for optimal grip when hiking on snow The surface and layout of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to avoid slipping.

SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.

Our engineers conduct laboratory tests to ensure that the product is fully satisfactory. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV-resistance, abrasion-resistance of outsole and upper components, accelerated aging.

To be well equipped in winter, we recommend that you follow these guidelines: Warmth: Warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool) Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimize moisture. Boot height: Adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.

A fabric's water-repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm, and breathable. The water-repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) for this purpose are available in our stores.

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

A product's environmental impact is calculated over its entire lifecycle using various indicators. A score from A to E is produced to help you make a responsible choice. This rating is used to easily identify the products with the best environmental performance. This is done by making a comparison between products of the same family (e.g. backpacks). Decathlon is a voluntary supporter of this environmentally-friendly labeling approach.

We have improved this product with an eco-design approach. The foam under the insole is made from 100% recycled polyurethane. The main outer fabric, fur collar, laces, loops, inner liner, and outer collar fabric are fluorine-free and made from 100% recycled polyester. The inner lining and outer collar fabric are also dope dyed for reduced impact. The cradle weight is 35% less than the previous version.

Imported

Our Decathlon SportsLab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Morphology (especially thanks to the 3D analysis) Movement sciences Thermal comfort (with its 4 climatic chambers) Behavioral and sensory sciences + we describe the specific aspects of the test related to the product (e.g. shower, wind tunnel, etc.)