SNB100 All-Mountain and Freestyle Snowboard

Deck: 5.0% Stainless Steel, 40.0% Epoxy Resin (EP), 30.0% Wood, 25.0% Fiberglass

Sintered base20 mm poplar wooden coreNumber of inserts: 10 + 10Directional twin tipSetback: 20 mmSize 152:Front width 291 mm, center 250 mm, rear 291 mm Radius 8.2 m Recommended stance: 540 mm. Size 156 cm:Front width 295 mm, center 253 mm, rear 295 mm Radius 8.5 m Recommended stance: 550 mm. Size 160 Mid Wide cm:Front width 309 mm, center 265 mm, rear 309 mm Radius 8.5 m Recommended stance: 575 mm.

In general, for all-terrain use/when learning how to snowboard, choose a size that is 15 to 20cm (6”-8”)shorter than your height e.g. a woman who is 1.66m (5'5”)tall should choose a board between 151 and 146cm (4'11” & 4'9”) in length. Shorter boards are easier to control. This is also advised for people who are light for their height. A bigger board will be more stable at high speed. 152cm (30-60 kg)=>5'6”-5'9”156cm (50-80 kg)=>5'7”-5'10” 160cm Mid Wide (70-90 kg)=>5'9”-6'3”

The SNB100 board is the easiest board in the range to ride. This board is for learning how to snowboard. It is easy to ride and forgiving of mistakes giving you an introduction to freestyle

The SNB100 is forgiving of all the imperfections of learning to snowboard. On pistes, it is easy to turn on all types of snow, while offering reassuring edge grip on hard snow. With its flat camber and large rocker, it makes learning to ride and discovering freestyle easier for beginners. If you are looking for a cheap board to jib, its flexibility will give you complete satisfaction on every street spot.

The shape of the snowboard is twin-tipped: The board's sidecuts are completely symmetrical between front and rear, providing perfect symmetry and centering of the board's features for riding in both directions in the same way. For even more versatility, the 20 mm inserts are offset, making the SNB100 a ”false” twin tip, so that it is directional enough for learning how to snowboard more easily.

A flat camber offers the best compromise between a standard camber, which provides traction and dynamic motion, and a reverse camber, which provides maneuverability when turning but little traction. It is ideal for beginners because:- the flat camber provides stability on modules or on piste- the long rocker is forgiving in snow parks and on piste because the 4 corners of the board do not touch the snow when the board is laid flat.

Flex is the stiffness of the board between the front and rear. The flex of the SNB100 board is approximately 3/10, making it very tolerant and lively. This is a very consistent type of flex from the front shovel (nose) to the rear shovel (tail), which is predictable and lively on all types of terrain. On the other hand, at high speed or on very frozen snow, this board will not carve out turns as well, and will have less pop compared to an Endzone 500

The torsional stiffness, i.e. the stiffness of the board to twisting between the feet, is about 2/5 on the SNB100, which makes the board easy to handle and turn and is forgiving of edge mistakes. Soft torsion for free movement between the feet. It is important at the beginner level: forgiving of edge errors. Soft torsion is also suitable for freestyle, jib, or flat use. Perfect for shredding!

The setback is when the board's compression points with the snow are not symmetrical in relation to the center of the board, but set back toward the rear. The bindings are also set back toward the rear by the same distance.20 mm setback = given that the setback is very slight, it is an all-round board that is almost centered for riding in both directions but also provides balance in turns and rotations.

All Dreamscape by Decathlon snowboarding products are tested under the actual conditions of use for which they were designed. In the snow, in the cold, in all conditions you may come across when snowboarding whether in powder, in the park, or on the piste. The design teams check that the program for which the product was conceived and developed perfectly matches its use in the field.

Dry edges at the end of the day to prevent rust. Ideally, wax every 5 outings.Storing for the summer: keep away from sunlight, you can leave your bindings on the board.

Imported