Snowboard Quick-Release Bindings Expedite 300 designed for beginners seeking quick-release bindings for stepping in/out while standing up.
This snowboard binding has memory tightening for stepping in/out while standing. Adjust it once,. then simply clip/unclip the central hook. Step in, lock and ride!
Good foot support at average speed, green to red runs.
Ultra-fast thanks to memory tightening. Step in, lock and ride!
Gas Pedal, front/rear highback, memory tightening strap.
EVA foam at the toes and heels.
M: 35 to 39, \n L: 38 to 43, \n XL: 42 to 50.
Wide monostrap, which is articulated at the center for very comfortable support.
A word from the product manager
The side-entry system of the Expedite 300 is very quick to use, as long as you take the time to correctly adjust them the first time you use them. Once they have been properly adjusted, you no longer have to touch them -: each time you put your boot in the binding, you will have the same setting (memory tightening system).
The Expedite 300 is designed to make riders' lives easier by saving time during boot entry/exit. It offers all the support required for beginners and even advanced riders. It is perfect both on-piste and off-piste. If you go very fast, we recommend that you switch to a traditional binding with an ankle strap (most powerful strap system available) for excellent foot support.
Handy tip: for an easy 1st adjustment, position your foot in the binding, fasten the buckles without clipping them and adjust the 2 ratchet buckles to their maximum. When you clip the buckle, you'll already have a good setting. After a few descents, you can adjust more precisely: tightening them a little more provides extra support while normal tightening provides maximum comfort. Note: the big buckle is inside for a more natural opening/closing action.
The available settings
"The factory settings suit most people, however you can adjust the following to suit your needs:
- the position of the highback (front/rear/side) by moving the position of the screws that hold it,
- highback canting,
- the length of the gas pedal, which is particularly useful for people with big feet. The practical gas pedal adjustment requires no tools and you don't need to remove the binding (see instructions)."
Stance (binding spacings)
To be adapted to your body shape, but it is worth noting that all snowboards have a recommended position for bindings (recommended stance, indicated by a marker between the inserts of the bindings). Increasing the stance width will lower your position on the board and improve stability. This also helps for aerial rotations. On freestyle boards, the recommended stance width is generally wider than on all-mountain boards.
Adjusting snowboard binding angles
For on-piste freeride use, we recommend an angle of +18° at the front and 0° at the rear. For multipurpose freestyle use, a +18° and -6° angle is better. An open rear foot gives more flexibility when riding switch. For pure freestyle use, you can choose entirely symmetric angles, e.g. +15° and -15°. Binding angles are very much a matter of personal choice. Feel free to check out what others are doing and try out different options. You may be pleasantly surprised!
Centering of the bindings on a snowboard
Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to center the boot on the snowboard and prevent the foot from protruding too far. Otherwise you are guaranteed to fall! The boot must therefore protrude from the board by an equal amount on both sides. The disc can also be rotated through 90° to alter the stance width in relation to the width set by the inserts. In this case, lateral centering is no longer possible.
Which size should I choose for my Expedite bindings?
M = 2.5 to 6
L = 5.5 to 8
XL = 8 to 14
Just as you would try on a boot with your own foot, it is strongly advisable to try out the bindings with your own snowboard boots. Because, depending on the brand, the volume of a particular size of boot may vary.
M=4-7½ / L=7-10½/XL=10-14
Foam : 50.0% Ethylene Vinyl Acetate, Foam : 50.0% Stainless steel\r\nFrame : 100.0% Polyamide 6.6
Before each trip, tighten all the binding screws.\nStoring for the summer: you can leave your bindings on the snowboard.
Snowboard Quick-Release Bindings Expedite 300 reviews