Shopping Cart
0
1
2
3
4
5
6

SCD Neoprene Diving Hood 4/3/2 mm

4/3/2 mm stretch neoprene hood for greater elasticity.

4.5 / 5

Regular price

$19.99

Subea

SCD Neoprene Diving Hood 4/3/2 mm designed for For regular scuba divers in waters between 61° and 75°F (16°-24°C)

A 4/3/2 mm diving hood to be worn with your wetsuit, to adapt your insulation to the diving environment. Perfect for water over 61°F.
Thermal insulation

4/3/2 mm stretch neoprene hood for greater elasticity.

Freedom of movement

Stretch neoprene with ventilation system.

Freedom of movement

Hood made with holes to allow air to escape

Technical features

4/3/2 mm thick neoprene balaclava Stretch neoprene around the neck and ears to ease movement and best adapt to all shapes. Air Expulse system: a system to evacuate air bubbles trapped in the hood. The central gray band is made of stretch neoprene to best adapt to the shape of the head.

GBS (glued and blind-stitched) assembly

The seams of the balaclava are watertight, sewn with GBS stitching (Glued and Blind Stitched): the neoprene is glued first of all, then sewn for maximum resistance (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).

Adjust the thickness, adjust your warmth!

When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with 5 pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.

Tips to look after your balaclava diving hood

1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with an antibacterial solution. 3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colors of the textile parts of the wetsuit to fade and speeds up the aging process of the neoprene. Zipper fasteners can be cleaned with a toothbrush and lubricated with silicone grease.

Product Testing

Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.

Composition

Foam : 100.0% Rubber - Chloroprene - Neoprene Lining : 100.0% Polyamide

Storage Instructions

Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.

Care Instructions

Rinse in fresh water. Do not leave to dry in the sun.

Origin

Imported

Model Code

8327951

SCD Neoprene Diving Hood 4/3/2 mm reviews

Sort By Write Review

Recently Viewed Products

 

Size Guide Visual