Wedze Evofit 550 Downhill Ski Boots Women's

Upper of: 100.0% Polypropylene ; Outer sole of: 100.0% Thermoplastic polyurethane ; Lining and sock of: 100.0% Polyester cationic ; Warm lining: 100.0% Polyester cationic

The Wedze 550 Evofit boot has a PU shell to keep a Flex 80, progressive and constant, whatever the temperature. Fitted with the EVOFIT liner, this boot adapts brilliantly to all body shapes: the instant FIT is excellent and can be improved by thermoforming the entire liner! The overlap system of the liner (”wallet” type) also offers good weight-bearing transmission, good recovery and makes them easy to put on.

This boot is equipped with 4 extremely robust aluminum micro-metric hooks. You can adjust the length of the buckle by tightening or loosening the hook. The top hook has 3 positions (adjustment without tools) for every calf size. A wide adjustment strap at the top of the upper provides powerful and easy tightening of the top of the shell.

To provide an indication of rigidity, brands assign a flex rating to every boot. This figure determines the rigidity of the whole boot: the higher its value, the stiffer the shell. A flex below 60 is designed for beginner level skiers. A flex from 60 to 80 is for intermediate skiers. Beyond this value, the products are aimed at advanced skiers. Well-built skiers can go up 1 level.

Once your foot is in the boot, fasten the buckles to the midpoint. Can you go further? This means the boot size isn't right for you. Once you've fastened your boots, you need to flex 3 times while pushing your calves forward (put your hands on your knees), which will push your heel back into the boot. Stand up: your foot should touch the end of the shell. When you flex, your foot should move backward so you can no longer feel the end.

1- Choose a technical ski sock that's thin so it prevents pressure points and promotes blood circulation in the foot.2- Choose a sole adapted to the shape of your foot to prevent it from being squashed and pressing against the shell. Ask a store assistant for advice.3- If after 2 days of skiing, you still feel some discomfort, thermoform your liner.

The EVOFIT liner consists of 100% thermoformable foam, which can heat up to mold to the shape of your feet and the shell of the boot. This reinforces the foot-liner-shell compatibility, thereby reducing the points of discomfort.

1- Preheat the convection oven to 175°F.2- Remove the liners from the shells.3- Remove the insoles from your liners.4- Put the liner part only in the oven for 10 minutes.5- Remove the liners from the oven.6- Put the insoles back inside the liners.7- Put the liners back in the boots.8- Put the boots on and lightly fasten each hook.9- Wait for 15 minutes at room temperature before taking them off.You are now ready to ski!

1- Ventilate your boots by removing the liner that is inside the plastic shells.2- Fasten the hooks at the first notch to prevent the boots from becoming deformed and, if possible, store them in a boot bag. 3- If possible, store them in a dry place where the temperature will not drop below 14°F. The plastic of the boot will thank you!

All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under the same conditions as you would experience in real-life use (snow, cold, powder snow, etc.) The design teams make sure that the program for which the product is designed and developed, corresponds perfectly to its use in the field.

Dry your boots before putting them away. Store them with the hooks closed in a ski boot bag and in a warm room.

Imported