Quechua MH500 Waterproof Mid Hiking Boots Women's

Outer sole of: 50.0% Rubber - Butadiene Rubber, 50.0% Ethylene Vinyl Acetate ; Upper of: 34.1% Polyamide, 33.2% Split bovine leather, 32.7% Polyurethane ; Lining and sock of: 100.0% Polyethylene Terephtalate

We have classified our product in terms of performance and function to suit the 3 levels of hiking: - Occasional: 12 hikes a year for approximately 3 to 4 hours, under 6 miles and under 2300' of vertical distance.- Regular: 20 outings a year. 4 to 6 hours, 6 to 12 miles, 2300' to 4000' of vertical distance per outing.- Intensive: for over 20 outings per year. For over 6 hours, over 12 miles, 4000' to 6500' of vertical distance per outing.

For the inner sole fabric coating of these boots, we dye the thread during manufacturing to reduce the environmental impact. Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this environmental impact, we use a mass pigmentation process that involves adding the color pigments when the thread itself is produced.

The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 310 miles

In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test, we can determine a time and number of miles that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the boot meets its promises.

To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles, and sand from getting in.We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.

This boot is fitted with the EVOFIT concept. With its stretch materials and specific design for the area of the foot where the joints are located, EVOFIT technology allows the boot to perfectly fit the shape of your foot.

Our Quechua global design center is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc.) and outdoor sports enthusiasts. A great asset for designing our hiking products and providing you with all our expertise.

The most important thing is to try on several sizes and styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction.Tip: Keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forward inside the boot.

Some Decathlon stores have a test route.1. Try on both boots, standing up and wearing the socks you use for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.3. Check 2 points:- The heel does not come up before the boot when you walk uphill.- The foot does not slide and the toes do not press against the front when going downhill.4. Try on several sizes and models.Break them in gradually to adapt them to your foot.

All our boots are tested for initial comfort and comfort in use by hikers from outside Decathlon under the same conditions you find in use. The aim is to test, develop, and confirm the product in the most objective way possible, so you can get maximum enjoyment out of hiking!

Store in a well ventilated dark, dry place.

Imported