X500, Inflatable High Pressure Dropstitch Canoe, 4-Person

"When the canoe is inflated: > length: 16'9" > width: 39.4" When stored in its bag: > height: 39.4" > width: 17.7" > thickness: 15" > full weight: 70 lbs

1. Inflate the main chamber (floor), then the intermediate chambers (walls), followed by the small chamber (central seat). All the volumes are inflated to 10 PSI max (0.7 bar). 2. You can position the seats (front and rear) using the straps located under the walls. We recommend the HP Itiwit twin-action hand pump (8387655).

1. Make sure that the surface on which you intend to fold the canoe is clean 2. Deflate the central seat by pressing on the valve piston. 3. Deflate the bottom and the side bladders by pressing the piston on each valve. 4. Fold the rest of the canoe in half lengthwise. 5. Fold the keel on itself to reduce the width of the canoe. 6. Make the first fold at the level of marking no. 1 7. Roll the canoe following the different markings visible on the hull

It would take something sharp to make that happen. If so, the canoe is composed of 4 independent "air chambers." The canoe floats enough to make it back to the shore safely.

The kit includes: - the trolley bag - canoe + inflatable seat for kids. - 2 wooden seats - a tightening strap - a repair kit

In the event of loss or breakage, the following parts are available from After-Sales service, on the internet or in stores, during the 10 years following the purchase of your canoe: front seat 8596029, rear seat 8596030, inflation valves 8552219, repair kit 8545487, tightening strap 8517756.

We recommend that you use the product with a buoyancy vest.

Imported

Dry, deflate, fold up. Store your canoe in its bag in a cool, dry place.

Guaranteed availability of spare parts essential to use of product: 2 years Availability: 10 years