Main fabric: 100.0% Polyester ; Main lining: 100.0% Polyester ; Secondary lining: 100.0% Polyester ; Coating: 100.0% Polyurethane

This jacket has a cut that fits all shapes while still looking very feminine. A warm layer such as a fleece or light sweater can be worn underneath. Inner lining can also provide more comfort. You can choose your usual size, or a size above if you don't want it to be worn fitted.

The hood is removable thanks to press studs. It can be adjusted in height using an elasticated cord and adjusted in depth thanks to a Velcro tab located at the back of the hood.

This jacket is constructed with 2 coated layers, including a mesh lining (large mesh lining) ‘2 layers’ means there is the outer fabric and the lining. A coating is applied to the inside of the fabric, it is similar to a resin that makes the component waterproof, while remaining breathable. The inner lining of the jacket has the role of protecting this coating

Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column (JIS 1092 standard). The higher the water pressure, the more waterproof the fabric. The component of this product has a waterproof rating of 5000 mm, i.e. it can withstand the pressure exerted by a 5000 mm column of water. This is also equivalent to 5 000 Schmerbers.

Component breathability is measured by its thermal evaporative resistance (RET). This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin. The lower the RET, the more breathable the fabric. RET ≤ 6: very breathable fabricRET ≤ 12: breathable fabricRET ≤ 20: little breathability Our product has a 12 RET rating

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.

This jacket was designed in our international design centre, at the foot of Mont Blanc in France, and then manufactured and assembled by our suppliers in Morocco, Vietnam and Bangladesh.These are partners that have genuine expertise in making our tents and with whom we are in close collaboration. Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment and environmental protection.

Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools:Morphology (especially thanks to the 3D analysis)Movement sciencesThermal comfort (with its four climatic chambers)Behavioural and sensory sciences+ we describe the specific aspects of the test related to the product (e.g. shower, wind tunnel, etc.)

Always make sure that this waterproof protective garment is completely dry before storing it.

Imported