Excellent traction. Support and protection.

---specs---

Footwear waterproofing test.

The footwear equipped with the NOVADRY® technology is tested in the lab and in the field to guarantee the best possible waterproofing and breathability. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking, half immersed in water so we can test that the inside remains perfectly dry.

3 levels of waterproofing.

During the waterproofing test, we test 3 levels of waterproofing: 2000 flexes (around 2 hours of walking), 4000 flexes (around 4 hours of walking) and 8000 flexes (around 8 hours of walking). Of course, after this test or in use, the shoe regains its original waterproofing once dry.

Shoe waterproofing level.

The 500 Warm waterproof boots are water resistant up to 8,000 flexes.

SNOWCONTACT technology.

SNOWCONTACT soles are made using a special component. Designs are optimized to provide excellent all-terrain grip and maximal traction all winter long. What's more, the SNOWCONTACT soles are more efficient than traditional soles on snow.

Field tests.

All our shoes undergo comfort and use tests carried out by users who are representative of our target market, in conditions identical to those found in typical use. Our Field Test Missions team up the product manager with people who aren't affiliated with QUECHUA, to test, improve, and validate our products.

Measurement of the boots' thermal insulation.

It was not previously possible to give a precise idea of the temperature at which your shoes would still insulate your feet from the cold. Now it can be done: the temperature limits for use are shown on your Quechua shoes. Based upon cold sensitivity tests in the field and in the laboratory using a panel of clients, we measure the thermal resistance of our shoes when resting and during activity. We take into consideration the differences between men and women.

Lab tests.

Laboratory tests were conducted to test the following elements: attachment of eyelets and straps, fixtures, toxicology, UV resistance, sole and upper component abrasion, advanced aging.

Product Testing

All our shoes are tested for wearing comfort and comfort in use by users who are representative of the target market, under the same conditions as those that will be experienced in real-life use. Our Field Test Missions team up the product manager with people who aren't affiliated with QUECHUA, to test, improve, and validate our products.

Composition

Upper of : 60.0% Polyurethane, Upper of : 40.0% Polyester cationic\r\nOuter sole of : 60.0% Rubber - Synthetic, Outer sole of : 40.0% Ethylene Vinyl Acetate\r\nWarm lining : 82.0% Polyester cationic, Warm lining : 18.0% Polyurethane\r\nLining and sock of : 100.0% Polyester cationic

Restrictions

Not suitable for glacier hiking.

Storage Instructions

Store in a dark, dry and well-ventilated place.

Care Instructions

Air dry. Do not dry near a heat source. Scrub with a soft brush. Air dry. \nRe-waterproof regularly using a suitable product.

Guarantee

2 Years

---/specs---

---catchline---

Comfortable and warm shoes. With their SNOWCONTACT sole, the 500 Active Warm Active waterproof shoe will keep you safe on all kinds of winter terrain.