Precision, grip, support and comfort.

---specs---

Crosscontact sole

Lengthy research into the design of the sole at the Essensole laboratories, combined with a special rubber formulation optimize grip on rocky terrain.

360° System

Our exclusive system uses a strap that goes under your instep. When the laces are tightened, the strap becomes tighter, to more efficiently support the instep without compromising on comfort. Because the angle of the strap is in line with the lacing, there are no hard points felt. Not only does this mean optimum support, but it also offers greater precision and safety on technical paths.

X stab technology

TPU part (rigid plastic) stabilizes the heel. This insert is embedded into the compression-molded EVA at the heel thereby stabilizing and keeping it in position at the back of the shoe. The insert extends out at the sides so that it is covered by the 360° System strap, gently merging with the rest of the shoe at the forefoot. Linked with the injected EVA at the front of the sole, it serves as a rigidifying component and optimizes dynamism.

Cushioning

Two types of materials have been used to provide an optimized cushioning / weight ratio. The heel (the part of your foot that needs the most cushioning) is made of compressed EVA. This provides long-lasting cushioning over time whilst minimizing the thickness of the shoe. The front of the shoe is made of injected EVA; this light and bouncy material allows you to push off effectively.

Waterproofing test

Footwear waterproofing test: laboratory and field-tested shoes with a breathable, waterproof membrane to ensure optimum protection from the rain. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, shoes are fitted to a mechanical arm that simulates walking and half immersed in water so we can test that the inside remains perfectly dry.

3 levels of waterproofing

During the waterproofing test, we test 3 levels of waterproofing: 2000 flexes (around 2 hours of walking), 4000 flexes (around 4 hours of walking) and 8000 flexes (around 8 hours of walking). Of course, after this test or in use, the shoe regains its original waterproofing once dry.

Waterproofing level

The Forclaz 700 waterproof passes the 8000 flexes test.

Buying tips

Try on both shoes, standing up, wearing hiking socks. Try several styles and sizes, if required. Check two comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying them on. Don't hesitate to walk around the store. Wear your shoes in gradually during the first hikes, to mold them to your foot.

What shoe size do I choose?

For hiking, try taking one shoe size up from your usual to ensure optimum comfort when going downhill and to prevent your toes from hitting the toe box. Tip: keep your toenails short and before descending, check that your lacing will stop your foot from sliding towards the front of the shoe.

Field test

All our shoes are tested for comfort and use by representative users under conditions identical to those found when in use. Our Missions Tests link the product manager up with people who are not affiliated with Quechua to test, develop and approve the products.

Laboratory test

Other laboratory tests are also conducted to approve the quality of the following components: torn eyelets and straps, bonding, toxicology, UV resistance, abrasion of the sole and the components of the upper, accelerated aging.

Product Testing

All our shoes are tested for comfort and use by representative users under conditions identical to those found when in use. Our Missions Tests link the product manager up with people who are not affiliated with Quechua to test, develop and approve the products.

Weight

1lb per shoe in size 8.5.

Composition

Outer sole of : 50.0% Rubber - Styrene Butadiene Rubber, Outer sole of : 40.0% Ethylene Vinyl Acetate, Outer sole of : 10.0% Thermoplastic polyurethane\r\nUpper of : 45.0% Leather, Upper of : 35.0% Polyester cationic, Upper of : 20.0% Polyurethane\r\nLining and sock of : 80.0% Polyester cationic, Lining and sock of : 20.0% Polyurethane

Restrictions

Not suitable for rock climbing.

Storage Instructions

Store in a well-ventilated place away from light and humidity.

Care Instructions

Take care of your shoes; cleaning them regularly helps maintain their efficiency for longer.\nUse the brush and/or sponge to clean the shoe and remove dirt or mud residue.\nThe use of cream or waterproof grease on split leather is not recommended. It's not a problem as such, but could change the aesthetics of the shoe.\nAir dry. Do not dry near a heat source.\nDo not machine wash.