Outer sole of: 70.0% Synthetic Rubber, 30.0% Ethylene Vinyl Acetate ; Upper of: 60.0% Polyester, 20.0% Polyurethane, 20.0% Leather - Bovine - Split ; Lining and sock of: 90.0% Polyester, 10.0% Polyamide

We have classified our products in terms of performance and features for 3 levels of Mountain Walking:- occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10km and less than 700m in elevation gain.- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.- Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.

For the inner sole fabric coating of these boots, we dye the thread during manufacturing to reduce the environmental impact. Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this environmental impact, we use a mass pigmentation process that involves adding the colour pigments when the yarn itself is produced.

The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over 500 km

The most important thing is to try on several sizes and styles of boots to find the one most suited to you! You can take a size above your usual one to prevent the toes from bumping into the toe box when going downhill, provided the foot is properly supported to avoid friction.Tip: keep your toenails short and, before a long descent, check that your lacing is tight enough to prevent your foot from sliding forwards inside the boot.

Some Decathlon stores have a test route.1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.3. Check two points:- the heel does not come up before the boot when you walk uphill.- the foot does not slide and the toes do not press against the front when going downhill.4. Try on several sizes and models.Break them in gradually to adapt them to your foot.

All our shoes are tested for initial comfort and comfort in use by hikers (who do not work for Decathlon) under the same conditions you will encounter yourself when hiking. The aim is to further develop the product and validate it as objectively as possible, for your greatest satisfaction.

Further laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, accelerated ageing.

The original insole in your boots is designed to accommodate most feet. A change of insole can bring:1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a shoe in your size.- Wear suitable socks- Tie and tighten your shoes properly.- Don’t hesitate to readjust your lace fastening during activity, particularly before tackling a climb or descent. - Wear your shoes on a short trip for the first use.

All our boots are tested for initial comfort and comfort in use by hikers from outside Decathlon under the same conditions you find in use. The aim is to test, develop and confirm the product in the most objective way possible, so you can get maximum enjoyment out of hiking!

Store in a well-ventilated dark, dry place.

Imported