FR 500, Ski and Snowboard Jacket, Women's

Placed heat pads to provide good thermal protection during your freeriding outings. This technology reserves a large area where the 3-layer membrane component can eliminate your perspiration more effectively. A perfect compromise between a fully padded jacket and a 3-layer jacket without providing any additional heat. Warmth and modular features to accompany you on your freeride outings throughout the season.

Hood over helmet designed to offer maximum protection ensuring freedom of movement. Adjustable to fit 3 sizes in a single movement, using a single tightening toggle located behind the head. Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in. Snow skirt that also reduces drafts and prevents snow from getting inside.

To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration. The vents play an important role in wicking away perspiration. This is why we have equipped this jacket with 2 ventilation zippers and 2 large zippers under the arms (30 cm in size M).

The wide fit, pre-shaped sleeves are there to free movement and enable you to ride in complete freedom. We designed this jacket with 1 component that has mechanical stretch properties. You are still free to move around for your favorite rides and tricks! ...while remaining stylish!

2 hand pockets with a waterproof zipper. 1 inside chest pocket with watertight zipper. 1 outer chest pocket with watertight zipper. 1 pocket with a zipper and flap on the left sleeve for the ski pass. 1 quick access inner mesh pocket.

To keep warm and dry, use the 3-breathable-layers rule: 1 ski base layer, 1 layer 2 jacket to retain warmth, 1 layer 3 ski jacket to protect you from the elements. C1: It keeps you dry by wicking away the perspiration from the skin to the other layers. C2: It provides warmth; this is the case for down jackets or fleece pullovers.

Protection from the outdoor elements (snow, rain, and wind) by preventing them from entering (while still allowing perspiration to escape so that you do not feel "wet inside"). It should therefore ideally be waterproof AND breathable. The 3rd layer can also provide insulation in the case of lined pants or jackets. This complements the properties of the 2nd layer.

The water-repellent property of a fabric is its ability to make water run off its surface without absorbing it. This prevents the fabric from becoming waterlogged and remains light, breathable, and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. For example, a fabric with a waterproof rating of 10,000 mm is therefore resistant to the pressure exerted by a 10,000 mm column of water

To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapor generated by physical activity can escape, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = little or no breathability.

The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable, and often more breathable than a coating.

The waterproof properties of the garment are related to its fabric, seam sealing, and assembly design. We then carry out shower tests on our garments.

This garment has been validated in a shower test under 100 L of water / m² / hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.

In addition to the breathability of the fabrics used, we employ technical solutions (zippers, vents, mesh) to improve the overall ventilation of our jackets and pants designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

The product's environmental impact is calculated over its entire lifespan, using various indicators. An overall score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, pants, backpacks etc.). Decathlon is committed to displaying the environmental information of its products. For more information: http://sustainability.decathlon.com/

All our Freeride and All-Mountain jackets and pants are equipped with the RECCO® system. With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After 3 washes, restore the water-repellent properties with a waterproof spray or wash-in product.

Imported

Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.

Dry this waterproof protective garment thoroughly before storing it.