Kids' Waterproof Mountain Walking Boots 10-6 MH500 Blue Grey

Outer sole of: 50.0% Polyurethane, 50.0% Butadiene Rubber ; Upper of: 55.0% Leather - Bovine - Split, 45.0% Polyester ; Lining and sock of: 100.0% Polyester

The grip of our soles is certified. To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (Smooth, Rugged, Dry, Wet). To validate these tests, we also assess the quality of our soles on the field, in the mountains, by a panel of young testers.

Tested both in the lab and real-world usage, this footwear guarantees optimum waterproofing and breathability. First, the shoe is immersed in water while internal air pressure is applied to check that no bubbles form on the surface of the footwear. Next, the boots are fitted to a mechanical arm that simulates walking, half immersed in water so we can test that the inside remains perfectly dry.For this model, the test lasted the equivalent of 8 km under the conditions mentioned above.

A shoe's waterproofing is often undermined by water getting in from the top of the shoe. To keep your feet dry for longer, it is therefore advisable to use a waterproof gaiter or mini-gaiter that will prevent water as well as pebbles, sand, etc. from getting inside through the top. It is advisable to use a waterproof spray several times a year. This restores the original water-repellent properties and prevents staining.

For hiking, don't hesitate to get one size larger than your child's usual shoe size. This will ensure optimal comfort on the way down and prevent the toes from banging against the shoe. Tip: keep nails short and, before any descent, check that the Velcro and/or laces are properly fastened to prevent the foot from slipping forward in the shoe.

Allow children to try on both shoes, standing up, with the socks worn for hiking. Check two comfort points: the base of the heel and the front part of the foot going down. Avoid all pressure points when trying shoes on. Gradually start using you shoes during your first few hiking trips to break them in.On the internet, you can print the outline and check the foot length: https://pdfcoffee.com/pedimetreuepdf-pdf-free.html

Removable insole for faster drying. It can also be replaced by an orthopaedic insole.

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.

Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools:Body shape (3D analysis in particular)Movement scienceThermal comfort (with its four climatic chambers)Behavioural and sensory sciences

Store in a dry and well-ventilated place.

Imported