Outer sole of: 60.0% Synthetic Rubber, 40.0% Ethylene Vinyl Acetate ; Upper of: 40.0% Polyester, 40.0% Leather - Bovine - Split, 20.0% Polyurethane ; Lining and sock of: 100.0% Polyester

We have classified our products in terms of performance and features for 3 levels of Mountain Walking:- occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 10km and less than 700m of elevation gain.- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.- Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.

New high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more durable. The sole is designed for better grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions. Field tests in the mountains allow us to do the final validation with a panel of testers. 30% rubber

In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.

To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.

Some Decathlon stores have a test route.1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.3. Check two points:- the heel does not come up before the boot when you walk uphill.- the foot does not slide and the toes do not press against the front when going downhill.4. Try on several sizes and models.Break them in gradually to adapt them to your foot.

Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a shoe in your size.- Wear suitable socks- Tie and tighten your shoes properly.- Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent. - Wear your shoes on a short trip for the first use.

A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the MH500, MH520 and MH900 are therefore preferable for absorbing perspiration and reducing overheating.

The original insole in your boots is designed to accommodate most feet. A change of insole can bring:1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

- Leave to air dry.- Remove dry mud with a stiff brush. - Clean marks using a brush and some warm water- Leave to dry- Spray with a re-waterproofing product to restore the water-resistance to the upper.

Our hiking shoes are first tested in our Decathlon Sportslab laboratory, based in Lille, which also contributes to the innovation and development of our Quechua products. It brings together several themes, each with their own area and technological tools.

Store in a well-ventilated dark, dry place.

Imported