Upper of: 80.0% Polyester, 20.0% Polyurethane ; Outer sole of: 100.0% Synthetic Rubber ; Lining and sock of: 100.0% Polyester

We perform comparative studies carried out in a thermal laboratory, in walking conditions in light winds (5km/h). This is how we measure the thermal resistance of our boots. However every individual feels the cold differently.Comfort temperature: felt slightly cold & 70% of users find the thermal sensation acceptable on their feet.Limit temperature: felt very cold & 10% of users consider the thermal sensation acceptable on their feet.

Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.

We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and ageing. During the waterproofing test, we test 3 levels of waterproofing: 2,000 flexes (approx. 4 km walk), 4,000 flexes (approx. 8 km walk) and 8,000 flexes (approx. 16 km walk). Your boots were tested to 4000 flexes, which is equivalent to 8 km of walking.

The grip of the boots depends on the number and shape of the spikes (4 mm on this boot). The grip is dependent on the materials of the sole and the tread pattern, like the tyres of your car. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving the sole grip.

Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.

To be well equipped in winter, we recommend that you follow these guidelines : Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool)Breathability: Choose the sock according to the intensity of the hike and make sure you wear a breathable model to minimise moisture.Boot height: adapt the height of the sock to the height of the upper and preferably choose high models if you want more protection.

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) for this purpose are available in our stores.

In use, the boot can become damp (condensation and perspiration)If the boot is very wet, we advise you to remove the insole, fill the upper with newspaper balls and change them regularly. The paper will pump out moisture and speed up drying.Never bring the boots too close to a heat source, but leave them in a warm, dry and ventilated place.

Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools:Body shape (in particular from 3D analysis)Movement scienceThermal comfort (with its four climatic chambers)Behavioural and sensory sciencesIn particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.

Store your products in a well-ventilated room away from light and moisture.

Imported