Men's Mountain Hiking Waterproof Rain Jacket MH100
Leading fully waterproof and ventilated jacket!
Men's Mountain Hiking Waterproof Rain Jacket MH100 designed for beginner mountain hikers seeking protection from the rain and wind.
Most affordable hiking jacket in our 100% waterproof range! It has a classic yet sporty look and practical design features that will protect you on every hiking trail.
Waterproof coating (5000 mm). Fully taped seams. Tested in 60 L/hr/m² for 3 hrs
Hydrophilic coating (RET=12): limits condensation inside the garment.
18 cm chest ventilation zippers that help to eliminate perspiration (Size: L)
Freedom of movement
Fitted back for freedom of movement.
Fastening drawstring at bottom of jacket. Depth- and height-adjustable hood.
Weight: 650 g in size L
2 hand pockets with flaps. 1 inner chest pocket.
Sizing and fit information
Standard cut. Jacket's inner volume allows you to wear it over a warm second layer such as a pullover or fleece jacket.
Height can be adjusted using an elastic drawstring and toggles. Adjustable depth using a velcro strip positioned at the back of the hood. Visor on the top of the head providing good protection for the face. Removable hood.
2 hand pockets + 1 inner pocket for a wallet. These 3 pockets have zippers.
Jacket hem drawstring
Elastic drawstrings and toggles.
Velcro tab fasteners.
Dual-material lining: mesh upper body to enhance the garment's breathability / nylon around the hips and sleeves to optimize ease of movement and resistance to wear.
Additional recommended products
Care products: waterproofing spray or liquid in the machine to renew the fabric's water-repellent properties and optimize performance throughout the lifespan of your garment.
We test a fabric's resistance to water pressure by measuring the height of a column of water supported by the fabric in mm (test based on the ISO 811 standard). The better the fabric resists pressure, the more waterproof it is. A component with a 5000 mm waterproof rating means it can withstand the pressure of the 5000 mm column of water. This is also equivalent to 5000 Schmerbers.
Waterproofing of the garment
This garment has been shower-tested using 60 litres of water/m²/hour for 2 hours. This test replicates the average conditions of a rain shower in the mountains.
To find out whether a fabric is breathable, we measure its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity is evaporated, and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric / 9 < RET < 12 = very breathable fabric / 12 < RET < 20 = breathable fabric / RET > 20 = fabric is not breathable or has low breathability.
Component with coating or a membrane
Like a layer of "paint" applied to the underside of the fabric to make it's waterproof while remaining breathable. It is often less costly than a membrane and requires a lining for protection. The membrane is like a very fine plastic film (polyurethane) making the component waterproof while remaining breathable. It has the advantage of being more supple, lightweight, durable, and often more breathable than the coating.
A fabric is water-repellent when it allows water to slide over its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight and breathable. A fabric becomes water-repellent by applying a treatment to its outer surface. This treatment must be renewed throughout the garment's lifetime (recommended after every three washes). All Quechua waterproof top-layer pants have received a water-repellent treatment.
The environmental impact of each product is calculated for the product's entire life cycle, using various indicators. A general ABCDE rating is attributed to help you identify the product with the best environmental performance by comparing similar types of products to each other (T-shirts, pants, backpacks, etc.). Decathlon is committed to displaying environmental information. For more information: http://sustainability.decathlon.com/
Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, we create and develop products that are beautiful, simple, and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real-world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.
Main fabric : 100.0% Polyester\r\nMain lining : 100.0% Polyester\r\nLining : 100.0% Polyester\r\nCoating : 100.0% Polyurethane
Always make sure that this waterproof protective garment is completely dry before storing it.
Men's Mountain Hiking Waterproof Rain Jacket MH100 reviews